0
Votes

Archer C80 in Access Mode with static IP - No DNS Server configuration option

 
0
Votes

Archer C80 in Access Mode with static IP - No DNS Server configuration option

Archer C80 in Access Mode with static IP - No DNS Server configuration option
Archer C80 in Access Mode with static IP - No DNS Server configuration option
2024-10-16 13:04:07
Model: Archer C80  
Hardware Version: V2
Firmware Version: 1.13.2

Archer C80 configured as Access Point and Dynamic IP address (DHCP with IP reservation at DHCP Server) has unstable WiFi connections. Using fixed IP adddress fixes that but Archer C80 "thinks" there is no Internet access on the Network Map. In our LAN the DNS traffic is restricted to our local DNS servers. We do not allow DNS traffic to traverse our firewall, hence the need to allow both IP Gateway and DNS server to be defined when using manual IP configuration.

Enhancement Request: IP fixed address should allow both "default gateway" and "DNS Server" configuration to avoid this behavior.

#1
Options
1 Reply
Re:Archer C80 in Access Mode with static IP - No DNS Server configuration option
2024-10-17 09:51:24

  @MPH-RJ 

Hi,

 

The router is designed to determine the network status based on DNS.

Currently, the feature you described cannot be added to the router.

It is normal to have a red light in your situation. But it will not affect your usage.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
#2
Options

Information

Helpful: 0

Views: 134

Replies: 1

Voters 0

No one has voted for it yet.