Performance problem at 2.4GHz

Lazza59

2024-10-22 08:51:51 - last edited Thursday

Posts: 1

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2024-10-22

Performance problem at 2.4GHz

2024-10-22 08:51:51 - last edited Thursday

Model: TL-WPA7617 KIT

Hardware Version: V2

Firmware Version: 1.0.10 Build 220701 Rel.65093n (6985)

Good morning.
I've installed a TL-WPA7617 V2 others with three TL-WPA V1 shots for the house.
In 5GHz they work fine with very good performance while when I have a Device going only in 2.4GHz the performance is very poor and it tends to disconnect the Device. By poor I mean travelling at 1 or 2 Mbps!!!
I tried changing the Channel I put it to 1 and the 20MHz channel width is slightly better.
It is not usable.
Does anyone have any ideas to improve stability and performance in 2.4GHz?
Thanks for the support.

1 Accepted Solution

Marvin_S

2024-10-23 06:08:58 - last edited Thursday

Posts: 1870

Helpful: 132

Solutions: 268

Stories: 0

Registered: 2022-05-09

Re:Performance problem at 2.4GHz-Solution

2024-10-23 06:08:58 - last edited Thursday

@Lazza59

Hi, thanks for posting question here。

For the slow speed, you may refer to the troubleshooting guide.

It is also suggested to contact local support for direct help.

Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode.

Information

Helpful: 0

Replies: 1

Performance problem at 2.4GHz

Performance problem at 2.4GHz

Information

Voters 0

Tags