Region : NewZealand

Model : TD-W8960N

Hardware Version : V4

Firmware Version : 1.1.1 Build 120912 Rel.67406

ISP :

Hi,

I'm having problems setting up port forwarding, I've also tried setting up a DMZ unsuccessfully.

Server Name External Port Start External Port End Protocol Internal Port Start Internal Port End Server IP Address WAN Interface Status Enable/Disable Edit Remove
EA1 9000 9999 UDP 9000 9999 192.168.1.100 pppoa0 Enabled
EA2 10000 20000 TCP 10000 20000 192.168.1.100 pppoa0 Enabled
EA3 3569 3569 TCP 3569 3569 192.168.1.100 pppoa0 Enabled
EA5 9946 9946 TCP 9946 9946 192.168.1.100 pppoa0 Enabled
EA6 9988 9988 TCP 9988 9988 192.168.1.100 pppoa0 Enabled
EA8 42124 42124 TCP 42124 42124 192.168.1.100 pppoa0 Enabled
EA Tunnel 3659 3659 UDP 3659 3659 192.168.1.100 pppoa0 Enabled

Setup up a Static leased internal IP address for the machine and tried entering it (192.168.1.100) for the DMZ as well. Tried rebooting have firmware 1.1.1 Build 120912 Rel.67406

I've never done this before so am probably missing something. TP LINK tech support don't seem too helpful so far.