Region : Argentina

Model : TL-WDR3600

Hardware Version : V1

Firmware Version : 3.13.31 Build 130320 Rel.55761n

ISP : Numericable

All,


hope you can help. I have been going nuts all day with this. My ISP modem was quite old so i decided to buy a new router. I changed the settings on my ISP modem to put it on bridge mode and my brand new WDR3600 routeur has the public ip. .. i am able to access the internet (using wire and wifi) from my new router..so far so good.

Things started to piss me off, when i wanted to forward incoming traffic to a specific PC on my network. The only port which i am able to forward is the incoming port 80

so far i have the following:

Incoming => Router NAT => PC
80 9090 192.168.1.104

that's working perfectly but if i want to do :


Incoming => Router NAT => PC
8080 9090 192.168.1.104

that doesn't work!! Any port other than 80 are not working..!! 21, 23.... i don't understand the problem.. It is definitely not a PC issue at i am am to get the web site running on it when the incoming port being requested is port 80..

i am going nuts..

Any idea? Any logs available to see incoming traffic?

Thank you