Ichigo wrote

there is no similar function on TD-W8960N, you just can see the devices connected to your Internet in DHCP--)DHCP Client List. But you can't disable or enable them.
if you don't want some devices with specific MAC address to connect your Internet or you just want some devices with specific MAC address to connect your Internet, you can do this settings in MAC Filter.
you can follow this FAQ: http://www.tplink.com/en/article/?faqid=323
Good luck!

Ichigo wrote

there is no similar function on TD-W8960N, you just can see the devices connected to your Internet in DHCP--)DHCP Client List. But you can't disable or enable them.
if you don't want some devices with specific MAC address to connect your Internet or you just want some devices with specific MAC address to connect your Internet, you can do this settings in MAC Filter.
you can follow this FAQ: http://www.tplink.com/en/article/?faqid=323
Good luck!

shadow85 wrote

Also, I tried to disable my computer just to test it, I put my MAC address in the WIRLESS MAC FILTER page, there is no save button, you just add entries. Anyways, I added my computer MAC address, but nothing happend, I could still use the internet, so it did not work or I am not doing it properly. My computer is WIRED, not WIRELESS.

Ichigo wrote

well, you should know that MAC filter is " Wireless MAC filter", so you can only limit access to the devices which are connected to your Internet wirelessly......

shadow85 wrote

Yes I do understand that, but I am after how to disable the WIRED devices connected to the internet through this modem router.

Ichigo wrote

well....if one device connect to your router via wired, and you want to disable it ,just plug out its line from your router.......