TD-W8951ND keep Droping

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

TD-W8951ND keep Droping

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TD-W8951ND keep Droping
TD-W8951ND keep Droping
2014-01-14 05:45:40
Region : Egypt

Model : TD-W8951ND

Hardware Version : V5

Firmware Version : 5.0.0 Build 131104 Rel.09041

ISP : TE-Data


i just bought this modem 1 month ago it was set as 'ADSL2+ Annex_M"
it was limit speed to 700 kbps and it's supposed to be 1 mb!

after searching on internet i found that changing to Annex_A will solve that and it did! :cool:
my speed is good but a new problem came up! it's dropping :(
giving this errors:

1/13/2014 23:24:37> Last errorlog repeat 6 Times
1/13/2014 23:24:37> netMakeChannDial: err=-3001 rn_p=804b9e70
1/13/2014 23:25:6> Last errorlog repeat 269 Times
1/13/2014 23:25:6> MPOA Link Up
1/13/2014 23:25:7> ppp_ready: ch:8050d7a0, iface:80454830
1/13/2014 23:25:8> SNMP TRAP 3: link up
1/13/2014 23:25:8> Accept() fail
1/13/2014 23:25:8> Accept() fail
1/13/2014 23:25:12> dynDNSOrgLogin:Error = -8, retCode


so i searched internet again and found that changing to "G.dmt Annex_A" will solve it :D
it solved the dropping! but my speed became 450 kbps!!!!
i tried my old router which is set to G.dmt the speed is just fine!

soo can anyone help?? :D thanks
  0      
  0      
#1
Options
3 Reply
Help
2014-01-16 06:56:18
any help? :/
  0  
  0  
#2
Options
Re:TD-W8951ND keep Droping
2014-01-16 11:02:35
try to set "ADSL2 Annex_A", check if the speed will go higher and no dropping problem :)

And something starnge, G.dmt is supposed to up to 8Mbps = 1024Kbps......
  0  
  0  
#3
Options
Re:TD-W8951ND keep Droping
2014-01-19 22:28:00
i tried ADSL2 Annex_A and the speed is alittle higher! but the dropping problem still exist
it drops every 30 min and smtimes every 15 mis giving the same errors:

1/19/2014 16:27:23> MPOA Link Up
1/19/2014 16:27:26> ppp_ready: ch:8050cb88, iface:80454008
1/19/2014 16:27:27> SNMP TRAP 3: link up
1/19/2014 16:27:27> Accept() fail
1/19/2014 16:27:27> Accept() fail
1/19/2014 16:27:30> dynDNSOrgLogin:Error = -8, retCode
  0  
  0  
#4
Options

Information

Helpful: 0

Views: 824

Replies: 3

Related Articles