Using wdr4300 withou WAN
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Using wdr4300 withou WAN
Region : Argentina
Model : TL-WDR4300
Hardware Version : V1
Firmware Version :
ISP :
I have pc act as home router to ISP. In the network have and switch. From one of port i have cable to lan of wdr4300. Wifi clients of wdr4300 work and have connected to internal network and internet. They use DCHP settings from PC. The wdr4300 itself cannot go to internet ? No ping to IP or domain address outside my lan. The PC internal IP is 192.168.1.1, the wdr4300 LAN adress is set ot 192.168.1.5. DHCP only from PC. How can close completely the WAN of the wdr4300? Like old wrt54gl with tomato soft . How can I put a default gateway on the LAN. Now in the System Routing Table is 192.168.1.0 255.255.255.0 0.0.0.0 LAN & WLAN. I want to set 192.168.1.1 to have access to the world. Cannot get NTP server for date,time and other...Thanks and sorry for my english.
Model : TL-WDR4300
Hardware Version : V1
Firmware Version :
ISP :
I have pc act as home router to ISP. In the network have and switch. From one of port i have cable to lan of wdr4300. Wifi clients of wdr4300 work and have connected to internal network and internet. They use DCHP settings from PC. The wdr4300 itself cannot go to internet ? No ping to IP or domain address outside my lan. The PC internal IP is 192.168.1.1, the wdr4300 LAN adress is set ot 192.168.1.5. DHCP only from PC. How can close completely the WAN of the wdr4300? Like old wrt54gl with tomato soft . How can I put a default gateway on the LAN. Now in the System Routing Table is 192.168.1.0 255.255.255.0 0.0.0.0 LAN & WLAN. I want to set 192.168.1.1 to have access to the world. Cannot get NTP server for date,time and other...Thanks and sorry for my english.
