Wired setup

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Wired setup

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Wired setup
Wired setup
2014-05-17 05:31:20
Region : Argentina

Model : TL-WA901ND

Hardware Version : V3

Firmware Version :

ISP :


I assume I can have the TL-WA830RE connected to my router hard wired, via rj45 and then get a wireless signal from the TL-WA830RE?
I need some help to achieve this, it's driving me mad.
Router IP Address : 192.168.1.1
DHCP IP Address Range : 192.168.1.2 - 192.168.1.254

Any help on how to successfully setup the TL-WA830RE would be appreciated.
  0      
  0      
#1
Options
1 Reply
Re:Wired setup
2014-05-18 04:36:46
Thanks.
BTW I'm in the UK not Argentina and it's a TL-WA830RE not a TL-WA901ND, not sure where that came from.

Think I'm almost there, done as you suggested and there is internet access now but only if I have the Wireless Network Name: of the TL-WA830RE different to the router and connect directly to it. I was hoping to seamlessly have internet access to the same network name whichever room I'm in.
If I have the TL-WA830RE Network Name is the same as my router it stays connected to the router if I'm in the room where the TL-WA830RE is situated with a very weak signal.

Router IP Address : 192.168.1.1
Router DHCP IP Address Range : 192.168.1.50 - 192.168.1.254

830 IP Address: 192.168.1.10
830 network Gateway: 192.168.1.1
830 DHCP Default Gateway: 192.168.1.10

And whats with the random question not working 9 times out of 10????
  0  
  0  
#3
Options

Information

Helpful: 0

Views: 542

Replies: 1

Related Articles