Assign IP Address
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Assign IP Address
Region : Mexico
Model : TL-WR841HP
Hardware Version : Not Clear
Firmware Version :
ISP : TELMEX
OK - so I've got a fiber optic modem (ONT), used as a DHCP / NAT, with all clients as static IP's, and an ASUS RT-N66 pimped to 500 mW's as an access point, and here I see the TL-WR841HP with 1000 mW's. I go out and buy one, try to set it up as an access point downstream of the ONT through Ethernet and surprise, it does work but wants to take over as primary DHCP / NAT - and keeps trying to stay on the 192.168.0.X domain, where I want it as a slave to another set of octet values.
Tried static IP, tried disabling the DHCP, tried multiple configurations, it just doesn't want to submit and play nice...
Any ideas?...
Model : TL-WR841HP
Hardware Version : Not Clear
Firmware Version :
ISP : TELMEX
OK - so I've got a fiber optic modem (ONT), used as a DHCP / NAT, with all clients as static IP's, and an ASUS RT-N66 pimped to 500 mW's as an access point, and here I see the TL-WR841HP with 1000 mW's. I go out and buy one, try to set it up as an access point downstream of the ONT through Ethernet and surprise, it does work but wants to take over as primary DHCP / NAT - and keeps trying to stay on the 192.168.0.X domain, where I want it as a slave to another set of octet values.
Tried static IP, tried disabling the DHCP, tried multiple configurations, it just doesn't want to submit and play nice...
Any ideas?...
