WPA-PSK/WPA2-PSK Stopped working
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
WPA-PSK/WPA2-PSK Stopped working
Region : UnitedKingdom
Model : TL-WA901ND
Hardware Version : V3
Firmware Version : 3.12.6 Build 110214 Rel.33012n
ISP :
Hi,
The device is in "Access Point" mode
I have an odd problem. Following a reboot, WPA-PSK/WPA2-PSK security no longer works.
The clients connect ok, but no traffic throughput and shortly afterwards "authentication error" is shown (on my mobile devices) at least - and there is no connection through the accecc point - although the device is still shown as connected.
If I "Disable Security", I can connect from all devices fine.
I have tripple checked and made sure it is not a PSK password problem.
I have tried all versions of the firmware on the website (including the beta) but the same problem whenever WPA-PSK/WPA2-PSK security is selected.
I have tried a period of having the device disconnected from mains.
I have returned to the original firmware - as listed above.
Any thoughts?
Model : TL-WA901ND
Hardware Version : V3
Firmware Version : 3.12.6 Build 110214 Rel.33012n
ISP :
Hi,
The device is in "Access Point" mode
I have an odd problem. Following a reboot, WPA-PSK/WPA2-PSK security no longer works.
The clients connect ok, but no traffic throughput and shortly afterwards "authentication error" is shown (on my mobile devices) at least - and there is no connection through the accecc point - although the device is still shown as connected.
If I "Disable Security", I can connect from all devices fine.
I have tripple checked and made sure it is not a PSK password problem.
I have tried all versions of the firmware on the website (including the beta) but the same problem whenever WPA-PSK/WPA2-PSK security is selected.
I have tried a period of having the device disconnected from mains.
I have returned to the original firmware - as listed above.
Any thoughts?