Print server HCL og subnet
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.Print server HCL og subnet
Posts: 11
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2014-09-24
2014-10-27 17:03:37
Posts: 11
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2014-09-24
Print server HCL og subnet
2014-10-27 17:03:37
Tags:
Region : Denmark
Model : TL-WDR4300
Hardware Version : V1
Firmware Version :
ISP :
Hi.
If we only talk about printing (and not scanning), is it possible til use the C7 as a print server together with printers not on the HCL-list?
And can I connect the printer attached to it like:
\\printserverIP\cue-name (and if so, what is the cue-name for a USB printer connected that way?) - or do I have to sit on the same LAN as the C7?
Regards, Lars.
Model : TL-WDR4300
Hardware Version : V1
Firmware Version :
ISP :
Hi.
If we only talk about printing (and not scanning), is it possible til use the C7 as a print server together with printers not on the HCL-list?
And can I connect the printer attached to it like:
\\printserverIP\cue-name (and if so, what is the cue-name for a USB printer connected that way?) - or do I have to sit on the same LAN as the C7?
Regards, Lars.
#1
Options
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Thread Manage
Announcement Manage
10 Reply
Posts: 687
Helpful: 17
Solutions: 0
Stories: 0
Registered: 2013-04-17
Re:Print server HCL og subnet
2014-10-27 18:20:21
Hi,
TP-Link routers are not good to connect a USB printer.
They require a special tool on each PC.
I didn't succeed to use mine simply as I did with the DD-WRT firmware...
TP-Link routers are not good to connect a USB printer.
They require a special tool on each PC.
I didn't succeed to use mine simply as I did with the DD-WRT firmware...
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#2
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 11
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2014-09-24
Re:Print server HCL og subnet
2014-10-27 18:44:08
HiSpeed wrote
Hi,
TP-Link routers are not good to connect a USB printer.
They require a special tool on each PC.
I didn't succeed to use mine simply as I did with the DD-WRT firmware...
Can it be shared on a server and then have other clients print to this shared print queue?
Regards, Lars.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#3
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 687
Helpful: 17
Solutions: 0
Stories: 0
Registered: 2013-04-17
Re:Print server HCL og subnet
2014-10-27 20:04:03
Which kind of server?
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#4
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 11
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2014-09-24
Re:Print server HCL og subnet
2014-10-28 01:18:26
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#5
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 687
Helpful: 17
Solutions: 0
Stories: 0
Registered: 2013-04-17
Re:Print server HCL og subnet
2014-10-28 02:38:42
With a network server, on each PC you have to define a local printer on TCP/IP port...
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#6
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 11
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2014-09-24
Dd-wrt
2014-10-29 05:52:07
HiSpeed wrote
With a network server, on each PC you have to define a local printer on TCP/IP port...
Yeah - I know.
Just a question if the server can connect to the TPlink printserver if they are not on the same subnet.
I googled DD-WRT and I found some posts on the dd-wrt forum from a "HiSpeed" - maybe this is you?
Would you recommend dd-wrt on the C7 v. 1.0?
Is it better - more stable, secure, flexible... and is it supported well enough?
Is the firmware keept updated decently?
Regards, Lars.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#7
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 687
Helpful: 17
Solutions: 0
Stories: 0
Registered: 2013-04-17
Re:Print server HCL og subnet
2014-10-29 15:16:15
I'm no more member of the DD-WRT forum because banned... ;-))
It is managed by unscrupulous people capable to modify the content of your post, or suppress it, without any explanation.
These guys (Murrkf, etc.) are intellectually very limited, they don't accept any contradiction, the greatest idiots I saw on the web.
They don't understand that this form of censorship is from another age, a shame for the forum world.
I tried to explain this situation to Brainslayer (the main devlopper of DD-WRT) without success...
Regarding now DD-WRT, it's a very powerfull software that I use on my Linksys E3000.
The print server works very well with it.
Unfortunately, there is a lot of versions and it is very hard to identify the best from the forum...
Regards,
It is managed by unscrupulous people capable to modify the content of your post, or suppress it, without any explanation.
These guys (Murrkf, etc.) are intellectually very limited, they don't accept any contradiction, the greatest idiots I saw on the web.
They don't understand that this form of censorship is from another age, a shame for the forum world.
I tried to explain this situation to Brainslayer (the main devlopper of DD-WRT) without success...
Regarding now DD-WRT, it's a very powerfull software that I use on my Linksys E3000.
The print server works very well with it.
Unfortunately, there is a lot of versions and it is very hard to identify the best from the forum...
Regards,
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#8
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 687
Helpful: 17
Solutions: 0
Stories: 0
Registered: 2013-04-17
Re:Print server HCL og subnet
2014-10-29 15:25:41
I'm no more a member of the DD-WRT forum... because banned... ;-))
This forum is managed by unscrupulous people capable to modify the content of a post, or suppress it, without any explanation.
These guys (Murrkf, etc.) are intellectually very limited, they don't accept any contradiction, probably the greatest idiots I saw on the web.
This censorship is a shame for the Internet world.
I tried to explain this situation to Brainslayer (the main developer of DD-WRT) without success...
Regarding now DD-WRT, it's a very powerful software that I use on my Linksys E3000.
The print server works very well with it.
Unfortunately, there is a lot of versions and it is very hard to identify the best from the forum...
Regards,
This forum is managed by unscrupulous people capable to modify the content of a post, or suppress it, without any explanation.
These guys (Murrkf, etc.) are intellectually very limited, they don't accept any contradiction, probably the greatest idiots I saw on the web.
This censorship is a shame for the Internet world.
I tried to explain this situation to Brainslayer (the main developer of DD-WRT) without success...
Regarding now DD-WRT, it's a very powerful software that I use on my Linksys E3000.
The print server works very well with it.
Unfortunately, there is a lot of versions and it is very hard to identify the best from the forum...
Regards,
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#9
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 687
Helpful: 17
Solutions: 0
Stories: 0
Registered: 2013-04-17
Re:Print server HCL og subnet
2014-10-29 17:52:28
Probably, but I'm no more a member of the DD-WRT forum... banned... ;-))
This forum is managed by unscrupulous people capable to modify the content of a post, or suppress it, without any explanation.
These guys (Murrkf, etc.) are intellectually very limited, they don't accept any contradiction, among the more stupid moderators of the web.
I tried to explain this censorship to Brainslayer (the main developer of DD-WRT) but without success.
He's probably not enough clever to change this situation...
Regarding now DD-WRT, it's a very powerful software that I use on my Linksys E3000.
The print server works very well with it.
Unfortunately, there is a lot of versions and it is very hard to identify the best from the forum...
Regards,
This forum is managed by unscrupulous people capable to modify the content of a post, or suppress it, without any explanation.
These guys (Murrkf, etc.) are intellectually very limited, they don't accept any contradiction, among the more stupid moderators of the web.
I tried to explain this censorship to Brainslayer (the main developer of DD-WRT) but without success.
He's probably not enough clever to change this situation...
Regarding now DD-WRT, it's a very powerful software that I use on my Linksys E3000.
The print server works very well with it.
Unfortunately, there is a lot of versions and it is very hard to identify the best from the forum...
Regards,
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#10
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 687
Helpful: 17
Solutions: 0
Stories: 0
Registered: 2013-04-17
Re:Print server HCL og subnet
2014-10-29 21:58:42
Probably, but I'm no more a member of the DD-WRT forum... banned... ;-))
This forum is managed by idiots, capable to modify the content of a post, or suppress it, without any explanation.
These guys (Murrkf, etc.) are intellectually very limited, they don't accept any contradiction, among the more stupid moderators of the web.
I tried to explain this censorship to Brainslayer (the main developer of DD-WRT) but without success.
He's probably not enough clever to change this situation...
Regarding now DD-WRT, it's a very powerful firmware that I use on my Linksys E3000.
The print server works very well with it.
Unfortunately, there is a lot of versions and it is very hard to identify the best from the forum...
Regards,
This forum is managed by idiots, capable to modify the content of a post, or suppress it, without any explanation.
These guys (Murrkf, etc.) are intellectually very limited, they don't accept any contradiction, among the more stupid moderators of the web.
I tried to explain this censorship to Brainslayer (the main developer of DD-WRT) but without success.
He's probably not enough clever to change this situation...
Regarding now DD-WRT, it's a very powerful firmware that I use on my Linksys E3000.
The print server works very well with it.
Unfortunately, there is a lot of versions and it is very hard to identify the best from the forum...
Regards,
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#11
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 11
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2014-09-24
2014-10-27 17:03:37
Posts: 11
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2014-09-24
Information
Helpful: 0
Views: 862
Replies: 10
Voters 0
No one has voted for it yet.
Tags
Report Inappropriate Content
Transfer Module
New message