SNR margin, loop loss and other measurements
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
SNR margin, loop loss and other measurements
Region : UnitedKingdom
Model : TD-8616
Hardware Version : V8
Firmware Version : dont know
ISP : plusnet uk
Hi - I have some difficulties with my Internet connection using a TP-Link TD-8817 - the connection basically drops every ten minutes or so... which is annoying when watching a movie ;-(
Here is a log image provided by my ISP: https://drive.google.com/file/d/0B45...ew?usp=sharing
Below is some other stats...
There was en engineer onsite today - he says the line is OK, it is my hardware...
Question: Is there a way to carry out this type of measurements with the TP-Link TD-8817?
Can I monitor SNR. loop loss, drop-outs over time? say for a week or so?
Thanks,
Oliver
WBC 160K - 24M Low delay (INP 0) 9dB Downstream, UC Medium delay (INP 2) 9dB Upstream (ADSL2+)
xDSL Status Test Summary
Sync Status: Circuit In Sync
General Information
NTE Status: NTE Power Status: PowerOn Bypass Status:
Upstream DSL Link Information Downstream DSL Link Information
Loop Loss: 20.3 38.6
SNR Margin: 11.5 8.1
Errored Seconds: 0 0
HEC Errors: 0
Cell Count: 8639 5247
Speed: 888 11236
Maximum Stable Rate (KBPS): 9088 Fault Threshold Rate (KBPS): 7270
Mean Time Between Retrains (Seconds): 1511 Mean Time Between Errors Upstream (Seconds): 198
Indicative Line Quality: C Mean Time Between Errors Downstream (Seconds): 41
Estimate:
WBC ADSL 2+ Up to 6 -- 3 to 8.5
Summary:
Connection has perdiods of heavy DCN.
Model : TD-8616
Hardware Version : V8
Firmware Version : dont know
ISP : plusnet uk
Hi - I have some difficulties with my Internet connection using a TP-Link TD-8817 - the connection basically drops every ten minutes or so... which is annoying when watching a movie ;-(
Here is a log image provided by my ISP: https://drive.google.com/file/d/0B45...ew?usp=sharing
Below is some other stats...
There was en engineer onsite today - he says the line is OK, it is my hardware...
Question: Is there a way to carry out this type of measurements with the TP-Link TD-8817?
Can I monitor SNR. loop loss, drop-outs over time? say for a week or so?
Thanks,
Oliver
WBC 160K - 24M Low delay (INP 0) 9dB Downstream, UC Medium delay (INP 2) 9dB Upstream (ADSL2+)
xDSL Status Test Summary
Sync Status: Circuit In Sync
General Information
NTE Status: NTE Power Status: PowerOn Bypass Status:
Upstream DSL Link Information Downstream DSL Link Information
Loop Loss: 20.3 38.6
SNR Margin: 11.5 8.1
Errored Seconds: 0 0
HEC Errors: 0
Cell Count: 8639 5247
Speed: 888 11236
Maximum Stable Rate (KBPS): 9088 Fault Threshold Rate (KBPS): 7270
Mean Time Between Retrains (Seconds): 1511 Mean Time Between Errors Upstream (Seconds): 198
Indicative Line Quality: C Mean Time Between Errors Downstream (Seconds): 41
Estimate:
WBC ADSL 2+ Up to 6 -- 3 to 8.5
Summary:
Connection has perdiods of heavy DCN.