TL-ANT2409A How To transmit from one antenna to the next
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TL-ANT2409A How To transmit from one antenna to the next
Region : Ireland
Model : TL-ANT2409A
Hardware Version : V1
Firmware Version :
ISP :
Hi,
I purchased 2 x TL-ANT2409A antennas.
I have 2 routers each in a separate building about 40m apart, and I want to transmit the wifi signal from one to the other. Does this antenna have this capability and how is it acheived? I am unclear as to how one of the antennas can transmit the signal and the other antenna can receive it.
According to the official website it can be achieved (See image below). Is it down to router settings or is it just plug and play?
I checked the documentation and found no mention of it.
I want to connect like so:
RouterOne -> TL-ANT2409A -> TL-ANT2409A -> RouterTwo
Model : TL-ANT2409A
Hardware Version : V1
Firmware Version :
ISP :
Hi,
I purchased 2 x TL-ANT2409A antennas.
I have 2 routers each in a separate building about 40m apart, and I want to transmit the wifi signal from one to the other. Does this antenna have this capability and how is it acheived? I am unclear as to how one of the antennas can transmit the signal and the other antenna can receive it.
According to the official website it can be achieved (See image below). Is it down to router settings or is it just plug and play?
I checked the documentation and found no mention of it.
I want to connect like so:
RouterOne -> TL-ANT2409A -> TL-ANT2409A -> RouterTwo
Data Card Antenna for GSM Mobile
davidom2513 wrote
Region : Ireland
Model : TL-ANT2409A
Hardware Version : V1
Firmware Version :
ISP :
Hi,
I purchased 2 x TL-ANT2409A antennas.
I have 2 routers each in a separate building about 40m apart, and I want to transmit the wifi signal from one to the other. Does this antenna have this capability and how is it acheived? I am unclear as to how one of the antennas can transmit the signal and the other antenna can receive it.
According to the official website it can be achieved (See image below). Is it down to router settings or is it just plug and play?
I checked the documentation and found no mention of it.
I want to connect like so:
RouterOne -> TL-ANT2409A -> TL-ANT2409A -> RouterTwo
[*]
It has only one USB port, so you can only have one 3G/4G card connected at a time. Some other models will connect 2 or 3 devices at a time, and can load-share between them. (However, those other devices all have some other limitation that disqualified them for me - like no WiFi as WAN, or requiring 2 or 3 external antennas, or not supporting external antennas at all.) For more visit
..........................................................................................................................................
[URL=http://feyeshoppy.com/data-card-antenna] DATA CARD ANTENNA [/url]
