RE200 static IP for clients
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
RE200 static IP for clients
Region : Poland
Model : RE200
Hardware Version : V1
Firmware Version : 3.14.2 Build 150514 Rel.38108n
ISP : INEA
Hello,
I have TL-WR740N router setup as AP(Firmware Version: 3.12.4 Build 100910 Rel.57694n, Hardware Version: WR740N v1/v2 00000000) and I am extending my WiFi with RE200(Firmware Version: 3.14.2 Build 150514 Rel.38108n Hardware Version: RE200 v1 00000000).
Because I'm working on IoT in my house, I would like to have static IPs assigned to some devices. So I configured them under DHCP->Address Reservation on TL-WR740N.
The problem is that when connecting through RE200 MAC of devices is changed, so devices are receiving different IPs.
I have turned off DHCP on RE200 and set static IP, but result are the same(MAC is changing).
For now I have changed SSID of RE200 network, but this is not ideal solution.
Can I somehow configure RE200 not to change MAC addresses?
Below example, MAC with beginning 32-B5-C2 is from RE200, and have wrong IP. I would like device medykoPa always to get IP 192.168.1.100.
Model : RE200
Hardware Version : V1
Firmware Version : 3.14.2 Build 150514 Rel.38108n
ISP : INEA
Hello,
I have TL-WR740N router setup as AP(Firmware Version: 3.12.4 Build 100910 Rel.57694n, Hardware Version: WR740N v1/v2 00000000) and I am extending my WiFi with RE200(Firmware Version: 3.14.2 Build 150514 Rel.38108n Hardware Version: RE200 v1 00000000).
Because I'm working on IoT in my house, I would like to have static IPs assigned to some devices. So I configured them under DHCP->Address Reservation on TL-WR740N.
The problem is that when connecting through RE200 MAC of devices is changed, so devices are receiving different IPs.
I have turned off DHCP on RE200 and set static IP, but result are the same(MAC is changing).
For now I have changed SSID of RE200 network, but this is not ideal solution.
Can I somehow configure RE200 not to change MAC addresses?
Below example, MAC with beginning 32-B5-C2 is from RE200, and have wrong IP. I would like device medykoPa always to get IP 192.168.1.100.
| 3 | medykoPa | 60-FE-C5-DE-3B-92 | 192.168.1.105 | 01:31:48 |
| 4 | medykoPa | 32-B5-C2-DE-3B-92 | 192.168.1.100 | 01:51:44 |