VPN site2site with 2 archer D9

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

VPN site2site with 2 archer D9

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
VPN site2site with 2 archer D9
VPN site2site with 2 archer D9
2015-07-08 20:43:16
Region : Argentina

Model : TL-ER6120

Hardware Version : V1

Firmware Version :

ISP :


Hi,
Please help me with the IPSEC VPN between 2 Archer D9, it wont to work, with basic configuration. Alway down!

I uppgrade to this firmware
Firmware Version:0.9.1 0.1 v0041.0 Build 150514 Rel.54055n

Hardware Version:Archer D9 v1 00000000



Thks
  0      
  0      
#1
Options
7 Reply
Re:VPN site2site with 2 archer D9
2015-07-09 11:06:30
Provide network diagram?
ISP cable/dsl/other?
WAN connection type static/dynamic/pppoe/other?
  0  
  0  
#2
Options
Re:VPN site2site with 2 archer D9
2015-07-09 22:08:14

vpnrouter wrote

Provide network diagram?
ISP cable/dsl/other?
WAN connection type static/dynamic/pppoe/other?



I used a cisco 800 series router who worked properly as Ipsec VPN , which I replaced by the TPLINK Archer D9.
LAN1 (192.168.1.1/24)___ARCHER D9 (ADSL ppoe with IP Fixe)------------------------------- (ADSL ppoe with IP Fixe) ARcher D9 ___ LAN2 (192.168.2.1/24)


I use the IPSEC config like the document ref guide. THANK'S




  0  
  0  
#3
Options
Re:VPN site2site with 2 archer D9
2015-07-10 09:24:27
The profiles look correct.
Post screenshot of system tools/ system log.
Capture log for connection attempts on both routers. You may send a pm if you do not want to post on forum.
  0  
  0  
#4
Options
Re:VPN site2site with 2 archer D9
2015-07-10 10:29:08
Hi,
In log file thers no line with ipsec.
2015-07-10 01:57:09 [5] DHCPD: Recv DISCOVER from 00:17:33:D4:CE:62
2015-07-10 01:57:09 [5] DHCPD: Ignore DHCP REQUEST form WAN interface.
2015-07-10 01:57:12 [5] DHCPD: Recv DISCOVER from 00:17:33:D4:CE:62
2015-07-10 01:57:12 [5] DHCPD: Ignore DHCP REQUEST form WAN interface.
2015-07-10 01:57:36 [5] DHCPD: Recv DISCOVER from 00:17:33:D4:CE:62
2015-07-10 01:57:36 [5] DHCPD: Ignore DHCP REQUEST form WAN interface.
2015-07-10 01:57:39 [5] DHCPD: Recv DISCOVER from 00:17:33:D4:CE:62
2015-07-10 01:57:39 [5] DHCPD: Ignore DHCP REQUEST form WAN interface.
2015-07-10 01:57:42 [5] DHCPD: Recv DISCOVER from 00:17:33:D4:CE:62
2015-07-10 01:57:42 [5] DHCPD: Ignore DHCP REQUEST form WAN interface.
2015-07-10 01:58:05 [5] DHCPD: Recv DISCOVER from 00:17:33:D4:CE:62
2015-07-10 01:58:05 [5] DHCPD: Ignore DHCP REQUEST form WAN interface.
2015-07-10 01:58:08 [5] DHCPD: Recv DISCOVER from 00:17:33:D4:CE:62
2015-07-10 01:58:08 [5] DHCPD: Ignore DHCP REQUEST form WAN interface.
2015-07-10 01:58:11 [5] DHCPD: Recv DISCOVER from 00:17:33:D4:CE:62
2015-07-10 01:58:11 [5] DHCPD: Ignore DHCP REQUEST form WAN interface.
All lines are about DHCP
Thank you for help

  0  
  0  
#5
Options
Re:VPN site2site with 2 archer D9
2015-07-10 18:22:13
Disable/Enable the IPSec tunnel then capture screenshot.
Or reboot router and then capture screenshot.
  0  
  0  
#6
Options
Re:VPN site2site with 2 archer D9
2015-07-10 20:26:53
I do it (enable/desable) and reboot no change in the system log.
  0  
  0  
#7
Options
It's OK
2015-07-11 01:26:20
Hi,
The problem was ip address from my provider (I ask them for 2 fixes Ip address) but one of those address changes, now they fixe me one address on the other side of vpn.
Thanks,
for your support.
  0  
  0  
#8
Options

Information

Helpful: 0

Views: 945

Replies: 7

Related Articles