TD-W8961ND V3 problem
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TD-W8961ND V3 problem
Region : Malaysia
Model : TD-W8961ND
Hardware Version : V3
Firmware Version : TD-W8961ND_V3_140305
ISP : Streamyx Malaysia
Hi guys,
I am here to seek for some help for my new modem TD-W8961ND.
The modem is just 1 week old that I just bought it recently to replace my TD-W8968. I am encountering the connection slow by using WIFI and the connection seems to be drop off (My page loads very slow sometimes and I unable to logon the router UI 192.168.1.1 , the page wont show up no matter I use Ethernet cable or WIFI)
I have tried the following method but the problem is still occurs randomly:
1) Disable UPNP service entirely
2) Set a fix IP for my PC
3) Change phone socket splitter and cable
4( Reset the modem to factory setting
5) Fix the Wifi channel to certain channel
By the way, I noticed that the system log are showing error code as below:
Your kind assistance will greatly appreciated.
Thanks
Model : TD-W8961ND
Hardware Version : V3
Firmware Version : TD-W8961ND_V3_140305
ISP : Streamyx Malaysia
Hi guys,
I am here to seek for some help for my new modem TD-W8961ND.
The modem is just 1 week old that I just bought it recently to replace my TD-W8968. I am encountering the connection slow by using WIFI and the connection seems to be drop off (My page loads very slow sometimes and I unable to logon the router UI 192.168.1.1 , the page wont show up no matter I use Ethernet cable or WIFI)
I have tried the following method but the problem is still occurs randomly:
1) Disable UPNP service entirely
2) Set a fix IP for my PC
3) Change phone socket splitter and cable
4( Reset the modem to factory setting
5) Fix the Wifi channel to certain channel
By the way, I noticed that the system log are showing error code as below:
Your kind assistance will greatly appreciated.
Thanks
Re:TD-W8961ND V3 problem
Hi, thanks for the reply. Regarding the router logon issue, it happens randomly regardless I am using cable or wireless connection.
I bought this new TD-W8961ND to replace my old TD-W8968 (Ver 1.0) is because I want a new modem and the antenna gain ( 3dbi vs 5dbi).
In fact, this is the 2nd unit (replacement unit from TP-Link) due to the first TD-W8961ND was found faulty on the first day I bought it, the ADSL port is not working at all.
It works fine for the first 2 days and then my wireless connection is getting slower and dropping frequently.
I have tried on the solutions below but I feel like it is not effective:
1) Disable UPNP service
2) Use inSSIDer to analyse and I fix my WIFI to a recommended channel that nobody is using.
3) Disable modem Firewall ( its "On" for default)
