TL-WN721N not working in USB3 port

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

TL-WN721N not working in USB3 port

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TL-WN721N not working in USB3 port
TL-WN721N not working in USB3 port
2015-08-03 20:17:55
Model :

Hardware Version : Not Clear

Firmware Version :

ISP :

I have TL-WN721N that works fine when connected to USB 2 port.
However if I connect the same to USB 3 port it simply fails to work. It's detected but results in Error Code 10 (Device can not start) in Device Manager.
I though USB 3 is supposed to be backward compatible with USB 2. I tried installing driver again, but it says 'Windows has determined that the driver for your device is up to date'
I am running Windows 7 32 bit OS.

Does it mean this device just won't work in USB 3 port or am I missing somethings? Thanks.
  0      
  0      
#1
Options
5 Reply
Re:TL-WN721N not working in USB3 port
2015-08-03 20:30:12
Hi,

That sounds like a PC issue...
Did you install all the MB drivers?
  0  
  0  
#2
Options
Re:TL-WN721N not working in USB3 port
2015-08-03 23:23:05
Thanks HiSpeed for prompt response. As such all drivers including MB and WiFi adapter are installed including latest driver for USB 3 port as provided by Gigabyte (Mobo manufacturer).
In USB port TL-WN721N simply does not work. It's ver is 1.9. For TL-WN721N I have used drivers from TL-WN721N_V1_131113.
Next revision TL-WN721N_V1_140915 is available but there's no change in drivers for Win XP/7 or 8
I will also try with Live Linux and see if it's detected at USB3 port and report back. Thanks.
  0  
  0  
#3
Options
Re:TL-WN721N not working in USB3 port
2015-08-04 00:11:49
TL-WN721N uses an Atheros AR9002U chip.

The best driver is probably here:

http://station-drivers.com/index.php/downloads/Drivers/Qualcomm-Atheros/WLan/AR5xxx-9xxxx-Serie/
  0  
  0  
#4
Options
Re:TL-WN721N not working in USB3 port
2015-08-04 02:53:19
The Atheros driver also works when device is connected to USB 2 port only. It fails to detect the device on USB 3 port.
Is this device compatible in USB 3 port? Is there any info available on the same.

I can simply forget this as long as I am attaching the device to USB 2 where it works perfect!
On Linux also it's detected only at USB 2.
  0  
  0  
#5
Options
Re:TL-WN721N not working in USB3 port
2015-08-04 17:41:53
May be you should open a ticket here:

http://ticket.tp-link.com/index.php?/Tickets/Submit
  0  
  0  
#6
Options

Information

Helpful: 0

Views: 1208

Replies: 5

Related Articles