AP500 DHCP requests when on static

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

AP500 DHCP requests when on static

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
AP500 DHCP requests when on static
AP500 DHCP requests when on static
2016-02-23 05:59:44
Model :

Hardware Version : Not Clear

Firmware Version :

ISP :

I have a AP500 set with a static IP and the DHCP on it turned off as my Draytek Modem handles DHCP.
I did a network scan and saw the AP500 appearing twice in the list, once on its static IP and again on an IP in the DHCP range, so I checked the system logs on the AP500 is requesting an IP.

1st day 00:20:47 DHCP NOTICE DHCPC Entering released state
1st day 00:21:16 DHCP NOTICE DHCPC perform a DHCP renew
1st day 00:21:16 DHCP NOTICE DHCPC Send DISCOVER with request ip 192.168.1.6 and unicast flag 0
1st day 00:21:16 DHCP NOTICE DHCPC Recv OFFER from server 192.168.1.254 with ip 192.168.1.6
1st day 00:21:16 DHCP NOTICE DHCPC Send REQUEST to server 192.168.1.254 with request ip 192.168.1.6
1st day 00:21:17 DHCP NOTICE DHCPC Recv ACK from server 192.168.1.254 with ip 192.168.1.6 lease time 172800
1st day 00:21:17 DHCP NOTICE DHCPC:GET ip:192.168.1.6 mask:255.255.255.0 gateway:192.168.1.254 dns1:192.168.1.254 dns2:8.8.8.8 static route:0
1st day 00:21:18 DHCP NOTICE DHCPC Unicasting a release of 192.168.1.6 to 192.168.1.254
1st day 00:21:18 DHCP NOTICE DHCPC Entering released state
1st day 00:21:46 DHCP NOTICE DHCPC perform a DHCP renew
1st day 00:21:46 DHCP NOTICE DHCPC Send DISCOVER with request ip 192.168.1.6 and unicast flag 0
1st day 00:21:46 DHCP NOTICE DHCPC Recv OFFER from server 192.168.1.254 with ip 192.168.1.6
1st day 00:21:46 DHCP NOTICE DHCPC Send REQUEST to server 192.168.1.254 with request ip 192.168.1.6
1st day 00:21:48 DHCP NOTICE DHCPC Recv ACK from server 192.168.1.254 with ip 192.168.1.6 lease time 172800
1st day 00:21:48 DHCP NOTICE DHCPC:GET ip:192.168.1.6 mask:255.255.255.0 gateway:192.168.1.254 dns1:192.168.1.254 dns2:8.8.8.8 static route:0
1st day 00:21:49 DHCP NOTICE DHCPC Unicasting a release of 192.168.1.6 to 192.168.1.254
1st day 00:21:49 DHCP NOTICE DHCPC Entering released state
1st day 00:22:17 DHCP NOTICE DHCPC perform a DHCP renew
1st day 00:22:17 DHCP NOTICE DHCPC Send DISCOVER with request ip 192.168.1.6 and unicast flag 0
1st day 00:22:17 DHCP NOTICE DHCPC Recv OFFER from server 192.168.1.254 with ip 192.168.1.6
1st day 00:22:17 DHCP NOTICE DHCPC Send REQUEST to server 192.168.1.254 with request ip 192.168.1.6
1st day 00:22:18 DHCP NOTICE DHCPC Recv ACK from server 192.168.1.254 with ip 192.168.1.6 lease time 172800
1st day 00:22:18 DHCP NOTICE DHCPC:GET ip:192.168.1.6 mask:255.255.255.0 gateway:192.168.1.254 dns1:192.168.1.254 dns2:8.8.8.8 static route:0
1st day 00:22:19 DHCP NOTICE DHCPC Unicasting a release of 192.168.1.6 to 192.168.1.254
1st day 00:22:19 DHCP NOTICE DHCPC Entering released state
1st day 00:22:47 DHCP NOTICE DHCPC perform a DHCP renew
1st day 00:22:47 DHCP NOTICE DHCPC Send DISCOVER with request ip 192.168.1.6 and unicast flag 0
1st day 00:22:47 DHCP NOTICE DHCPC Recv OFFER from server 192.168.1.254 with ip 192.168.1.6
1st day 00:22:47 DHCP NOTICE DHCPC Send REQUEST to server 192.168.1.254 with request ip 192.168.1.6
1st day 00:22:48 DHCP NOTICE DHCPC Recv ACK from server 192.168.1.254 with ip 192.168.1.6 lease time 172800
1st day 00:22:48 DHCP NOTICE DHCPC:GET ip:192.168.1.6 mask:255.255.255.0 gateway:192.168.1.254 dns1:192.168.1.254 dns2:8.8.8.8 static route:0
1st day 00:22:49 DHCP NOTICE DHCPC Unicasting a release of 192.168.1.6 to 192.168.1.254
1st day 00:22:49 DHCP NOTICE DHCPC Entering released state

Why would it be doing this when its set to use a static?
  0      
  0      
#1
Options
4 Reply
Re:AP500 DHCP requests when on static
2016-02-23 16:02:19
I got a reply from the TP-LINK support, this is a bug , they said they will release a beta firmware to fix it.
  0  
  0  
#2
Options
Re:AP500 DHCP requests when on static
2016-03-01 20:56:19

little Anthony wrote

I got a reply from the TP-LINK support, this is a bug , they said they will release a beta firmware to fix it.


Cheers, just got the same response from them. For now i have just set up a DHCP lease using the IP address I want the device to have.
  0  
  0  
#3
Options
Re:AP500 DHCP requests when on static
2017-01-10 19:05:16
I saw this too, we are on 2017, is this device abandoned by tp-link?
  0  
  0  
#4
Options
Re:AP500 DHCP requests when on static
2017-01-21 05:50:35
The official firmware on the website has not changed since 24/11/15 and my beta firmware fixing multi ssid is from 07/06/16.
It´s a shame ... But who cares @ tp-link - Lesson learned - Other vendor next time.
  0  
  0  
#5
Options

Information

Helpful: 0

Views: 1019

Replies: 4

Related Articles