TD-W8968v1 Firmware update fail

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

TD-W8968v1 Firmware update fail

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TD-W8968v1 Firmware update fail
TD-W8968v1 Firmware update fail
2016-04-15 01:12:41
Model : TD-W8968

Hardware Version : 1.1

Firmware Version : 0.6.0_1.3

ISP :

I had the firmware version 131226 but I find on THIS web the version v140707
Now my modem only work as switch. :'(

Big mistake, I did not see the version number (¬_¬ ¡)
TD-W8968v1_ 0.6.0_0.4_up_boot(140707)_2014-07-07_11.00.21
TD-W8968v1_ 0.6.0_1.3_up_boot(131226)_2013-12-27_10.37.56

Without lucky, I did try powering on with reset button pressed
Exists process for recovery?

I have a USB-TTL but i don't see serial port


  0      
  0      
#1
Options
2 Reply
Re:TD-W8968v1 Firmware update fail
2016-04-18 18:23:25
Hello
"Without lucky, I did try powering on with reset button pressed"
are you sure that the reset has really been done?
the right way of doing it is usually
- power on your device
- firmly hold the reset button a long time, say 20 seconds
- release it
- try to open 192.168.1.1 / admin / admin
Try it several times if you're not sure.
hopefully it could still work.

Edit: the version number is on the bottom of the device. There's a box: "Model: TD-W8968 Ver : 1.0" on mine.
  0  
  0  
#2
Options
Re:TD-W8968v1 Firmware update fail
2016-04-20 01:38:28
Yes, I'm sure.
I tried various combinations:
Power on + Reset
Power on + WPS
Power on + WiFi
Power on + Reset + WPS
Etc.

When I turn on the power LED lights
Some seconds all LAN's LED lights and then lights turn off leaving those connection
And only work as switch layer 2

All the information I consulted, is related to OpenWRT maybe that's why it does not work, my firmware was tp-link
  0  
  0  
#3
Options

Information

Helpful: 0

Views: 1402

Replies: 2

Related Articles