TD-W8960N - Traffic Control Option Missing (Bandwidth Control via IP/MAC ADD)
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TD-W8960N - Traffic Control Option Missing (Bandwidth Control via IP/MAC ADD)
Model :
Hardware Version : Not Clear
Firmware Version :
ISP :
Hi Guys
I've recently purchased a TP Link model no. TD-W8960N and part of the reason why I purchased this was due to the traffic control feature. I've looked under Advanced Setup as well as QoS and there is no feature on my router mentioning about traffic control.
The router states it has this feature there is also an FAQ guide that I found to get this setup, but there is 100% no feature for me to use, I spent nearly 2 hours last night looking into this however still no luck.
Version info:
If someone is able to shed some light onto this matter I would be greatly appreciated!
Thank you
Hardware Version : Not Clear
Firmware Version :
ISP :
Hi Guys
I've recently purchased a TP Link model no. TD-W8960N and part of the reason why I purchased this was due to the traffic control feature. I've looked under Advanced Setup as well as QoS and there is no feature on my router mentioning about traffic control.
The router states it has this feature there is also an FAQ guide that I found to get this setup, but there is 100% no feature for me to use, I spent nearly 2 hours last night looking into this however still no luck.
Version info:
Firmware Version: | 1.0.9 Build 160614 Rel.41323 |
Hardware Version: | TD-W8960N V7 0x00000000 |
If someone is able to shed some light onto this matter I would be greatly appreciated!
Thank you