Nest Thermostat and TL-MR6400 settings - any tips welcome!

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Nest Thermostat and TL-MR6400 settings - any tips welcome!

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Nest Thermostat and TL-MR6400 settings - any tips welcome!
Nest Thermostat and TL-MR6400 settings - any tips welcome!
2016-09-02 22:38:43
Model :

Hardware Version :

Firmware Version :

ISP :

Advice please.

Can anyone assist or is there anyone on this forum who has successfully connected their TL-MR6400 to a Nest thermostat - I've been through all the port settings with Nest Customer support and turned off WPA2 but I still cannot connect - I can get the Nest to work if I use my iPhone's hot-spot but not through the MR6400 - anyone who has some success stories and tips - I am all ears!.

Thanks in advance
Justin
  0      
  0      
#1
Options
8 Reply
Re:Nest Thermostat and TL-MR6400 settings - any tips welcome!
2016-10-15 17:56:26
Anyone got anything on this issue?
  0  
  0  
#2
Options
Re:Nest Thermostat and TL-MR6400 settings - any tips welcome!
2016-11-07 17:50:05
I do have similar problem; Nest protect and nest cam works fine, nest thermostat does not
  0  
  0  
#3
Options
Re:Nest Thermostat and TL-MR6400 settings - any tips welcome!
2016-12-08 06:02:49
I'll need to check at the and come back to you - does it make a difference?

JB
  0  
  0  
#5
Options
Solution: set DNS addresses in DHCP settings
2017-07-03 04:17:53
After hours of trial and error, I finally found a solution.
On the admin website of TP-LINK, go to DHCP > DHCP Settings, and set Primary and Secondary DNS. You can use Google's DNS for instance : 8.8.8.8 and 8.8.4.4.
Then go to System tools > Reboot and reboot the router.

It worked for me :-)
  1  
  1  
#6
Options
Thanks
2017-07-03 14:41:32
Thanks for the reply I'm going to try this at the weekend - do those google DNS work if that's what I were to use? I nearly put this router on eBay I'd got so fed up with it!


nayals wrote

After hours of trial and error, I finally found a solution.
On the admin website of TP-LINK, go to DHCP > DHCP Settings, and set Primary and Secondary DNS. You can use Google's DNS for instance : 8.8.8.8 and 8.8.4.4.
Then go to System tools > Reboot and reboot the router.

It worked for me :-)
  0  
  0  
#7
Options
Re:Nest Thermostat and TL-MR6400 settings - any tips welcome!
2017-07-03 15:38:54
Yep, I personally used Google's DNS and it worked.
  0  
  0  
#8
Options
Re:Nest Thermostat and TL-MR6400 settings - any tips welcome!
2017-08-11 22:00:44
Nayals- thanks a million for posting this solution - this has changed everything - I was about stick this router on eBay - so glad you posted a solution - thanks again - real star solution.Justy
  0  
  0  
#9
Options
Re:Nest Thermostat and TL-MR6400 settings - any tips welcome!
2017-08-31 22:19:18
I did the same with my Netgear Arlo and now it works, thank you very much
  0  
  0  
#10
Options

Information

Helpful: 0

Views: 1409

Replies: 8

Related Articles