TD-W8960N - Unable to change port 80
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TD-W8960N - Unable to change port 80
Model :
Hardware Version :
Firmware Version :
ISP :
Hardware Version :
Firmware Version :
ISP :
Hi There,
How am I able to change the remote management port away from port 80 aswell as disable it?
There appears no menu configuration available that allows changes, only to be able to disable the remote management.
I have a NAS that is sitting behind the TD-W8960N, and it requires port 80 to be enable to it, as I am using dynmaic DNS to access it, as ISP service provider is unable to provide a static IP. I am using latest firmware.
How am I able to change the remote management port away from port 80 aswell as disable it?
There appears no menu configuration available that allows changes, only to be able to disable the remote management.
I have a NAS that is sitting behind the TD-W8960N, and it requires port 80 to be enable to it, as I am using dynmaic DNS to access it, as ISP service provider is unable to provide a static IP. I am using latest firmware.
| Firmware Version: | 1.0.9 Build 160614 Rel.41323 |
| Hardware Version: | TD-W8960N V7 0x00000000 |
