TP-Link Archer D7: Firmware upgrade issue

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

TP-Link Archer D7: Firmware upgrade issue

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TP-Link Archer D7: Firmware upgrade issue
TP-Link Archer D7: Firmware upgrade issue
2016-12-21 16:15:01
_______________________________________________

Model : TP-Link Archer D7

Hardware Version : Archer D7 v1 00000001

Firmware Version : 0.9.1 1.3 v002d.0 Build 150911 Rel.30949n

ISP : TIM Italia
_______________________________________________

Good morning everyone;

After numerous attempts to call Dell for technical support me to do was to address the forum. I run the firmware update of my Archer D7 (via firmware downloads for Archer D7 V1 from the official page), regarding the firmware version, in the info of the modem, I always see the same that it was before, even after the update is the: 0.9.1 Build 150911 1.3 v002d.0 Rel.30949n. It's correct? I do not see any changes.
The router continues to function properly. Thanks for your attention.
  0      
  0      
#1
Options
7 Reply
Re:TP-Link Archer D7: Firmware upgrade issue
2016-12-21 19:09:27
Hi,

May I know which version do you want to update to?
And is there any pop-up tips during the upgrade?
  0  
  0  
#2
Options
Re:TP-Link Archer D7: Firmware upgrade issue
2016-12-21 19:33:09
Thank you.. The hardware version is: Archer D7 00000001 v1.
  0  
  0  
#3
Options
Re:TP-Link Archer D7: Firmware upgrade issue
2016-12-22 13:54:23
The latest firmware for this model is Archer D7(EU)_V1_160216on the official website.
http://static.tp-link.com/res/down/soft/Archer_D7(EU)_V1_160216.zip
Please download and extract this firmware and then install it on your Archer D7.
Normally, when you select the bin file and click the Upgrade icon on Firmware Upgrade page (Advanced -> System Tools), there will appear a progress bar reminding the router is upgrading & rebooting.
Please pay attention to the upgrade process and double check if you can see the whole progress completed. If not, please also tell us or provide screeshots of any pop-up error message.
  0  
  0  
#4
Options
Re:TP-Link Archer D7: Firmware upgrade issue
2016-12-22 13:55:17
The latest firmware for this model is Archer D7(EU)_V1_160216on the official website.
http://static.tp-link.com/res/down/soft/Archer_D7(EU)_V1_160216.zip
Please download and extract this firmware and then install it on your Archer D7.
Normally, when you select the bin file and click the Upgrade icon on Firmware Upgrade page (Advanced -> System Tools), there will appear a progress bar reminding the router is upgrading & rebooting.
Please pay attention to the upgrade process and double check if you can see the whole progress completed. If not, please also tell us or provide screeshots of any pop-up error message.
  0  
  0  
#5
Options
Re:TP-Link Archer D7: Firmware upgrade issue
2016-12-22 19:14:46
You described the same process that I did, and I do not proved any error message. Thanks.
  0  
  0  
#6
Options
Problem update tplink archer d7
2018-01-18 00:28:55
open 192.168.1.1 error( image selezionabile97)



Erroe conection internet not ISP selezionable (image96)






open advanced setting error 9003 (image 98)



after Upgrade and reboot to the last version ( http://static.tp-link.com/res/down/s..._V1_160216.zip) but error 1 (image selezione100.jpg)



the led wan e internet is always off (then after manually reset)


Help me!


HoldenGoodbye wrote

You described the same process that I did, and I do not proved any error message. Thanks.
  0  
  0  
#7
Options
Re:TP-Link Archer D7: Firmware upgrade issue
2018-12-25 05:23:48

So when the duck are we actually going to get a stable firmware for these Archer D7 units.

 

EVERYTHING release so far is Crap and resultss in daily reboots to get asny form of internet.

 

How is it that the 2.4Ghz SSID can work fine, but thje 5Ghz SSID reports that internet is not available, yet switching to the 2.4Ghz SSID works perfeclty. Its the same ducking internet connection, only difference, the crap firmware that is provided by you bunch, obviously untested and uncaring about your Australian market.

 

Pull your finger out and get something together that actually works.....

  0  
  0  
#8
Options

Information

Helpful: 0

Views: 2833

Replies: 7

Related Articles