TD-W9980 USB Mass Storage disappears from the list after some time and became not accessible.
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TD-W9980 USB Mass Storage disappears from the list after some time and became not accessible.
Model :
Hardware Version :
Firmware Version :
ISP :
Hi,
I have a new N600 Wireless Dual Band Gigabit VDSL2/ADSL2+ Modem Router - TD-W9980.
Firmware version:0.6.0 1.12 v0021.0 Build 150507 Rel.40130n
[B][B]Hardware version:TD-W9980 v1 00000000[/B]
[/B]
I connected an USB Mass Storage to one of the USB connections.
It successfully recognized and saw it in the Mass Storage List and the HDD accessible via file explorer.
Also I defined specific folder in this HDD as a media server and it successfully recognized by my LG TV.
The problem is that after some time the HDD is no more in the Mass Storage List and no more accessible via file explorer.
However, specific folder in this HDD that was configured as a media server still recognized by my LG TV.
The only work around is to disconnect HDD from USB and connect back.
HDD will appear in the Mass Storage List and became accessible via file explorer.
Any possible solution?
Hardware Version :
Firmware Version :
ISP :
Hi,
I have a new N600 Wireless Dual Band Gigabit VDSL2/ADSL2+ Modem Router - TD-W9980.
Firmware version:0.6.0 1.12 v0021.0 Build 150507 Rel.40130n
[B][B]Hardware version:TD-W9980 v1 00000000[/B]
[/B]
I connected an USB Mass Storage to one of the USB connections.
It successfully recognized and saw it in the Mass Storage List and the HDD accessible via file explorer.
Also I defined specific folder in this HDD as a media server and it successfully recognized by my LG TV.
The problem is that after some time the HDD is no more in the Mass Storage List and no more accessible via file explorer.
However, specific folder in this HDD that was configured as a media server still recognized by my LG TV.
The only work around is to disconnect HDD from USB and connect back.
HDD will appear in the Mass Storage List and became accessible via file explorer.
Any possible solution?