Model :

Hardware Version :

Firmware Version :

ISP :

Hi

My IpTV provider works using IPoA, for this, I have to configure a VC (Virtual circuit) using the IPoA encapsulation, and I have to specify an IP, Gateway and a subnet mask. This is how here in Spain imagenio (IpTV service by Telefonica) works. this router contains an option for IPtV, but this does not match the requirements here. Here the requirements are:

- The router must contain 2 assigned IPs, 192.168.1.1 (for example), plus one IP which is in the same network as the IpTV decoder
- A virtual circuit must be created using IPoA encapsulation using a mask and a gateway
- IGMP proxy must be activated for this VC
- Both NAT and firewall must be disabled

I think that with this router I can accomplish all the requirements, but I was not able to set the second IP, nor in the IPoA wizard neither in the LAN configuration wizard

Any help would be appreciated.