TL-WR902AC - Loss of Connection in Client Mode after a couple of Days
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TL-WR902AC - Loss of Connection in Client Mode after a couple of Days
Model :
Hardware Version :
Firmware Version :
ISP :
Hello,
I use the TL-WR902AC in Client Mode, to connect my DVR to the Internet/internal Network.
The TP is constant connected with the power adapter.
Everything works fine, but repeadly after about 2-3 Days with constant connection, the TP loses the connection to the internet/internal Network.
After pulling and reconnecting the power adapter, the TP works consistant for the next couple of days.
I've used a Netgear Wnce before as a Bridge, and it worked for months without a single losss of connection.
So I assume the issue is not my Network or the Receiver Settings.
Any help is appreciated.
Hardware Version :
Firmware Version :
ISP :
Hello,
I use the TL-WR902AC in Client Mode, to connect my DVR to the Internet/internal Network.
The TP is constant connected with the power adapter.
Everything works fine, but repeadly after about 2-3 Days with constant connection, the TP loses the connection to the internet/internal Network.
After pulling and reconnecting the power adapter, the TP works consistant for the next couple of days.
I've used a Netgear Wnce before as a Bridge, and it worked for months without a single losss of connection.
So I assume the issue is not my Network or the Receiver Settings.
Any help is appreciated.
