300M Wireless N Access Point Model No. TL-WA801ND PoE Problems
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
300M Wireless N Access Point Model No. TL-WA801ND PoE Problems
Model :
Hardware Version :
Firmware Version :
ISP :
I cannot get the PoE to work with my AP. I have a CAT6 cable 15mtrs long connected from my AP to my PoE connector thats powered from my electrical socket. I have another cable from the LAN port of my PoE going to my switch. The power indicator on the AP lights up green, blinks for a few seconds then goes off and keeps repeating the same cycle. I have tried the cables with other devices and they work fine. I have also tried using completely different cables but nothing works.
PLEASE HELP!!!
Hardware Version :
Firmware Version :
ISP :
300M Wireless N Access Point |
Model No. TL-WA801ND |
I cannot get the PoE to work with my AP. I have a CAT6 cable 15mtrs long connected from my AP to my PoE connector thats powered from my electrical socket. I have another cable from the LAN port of my PoE going to my switch. The power indicator on the AP lights up green, blinks for a few seconds then goes off and keeps repeating the same cycle. I have tried the cables with other devices and they work fine. I have also tried using completely different cables but nothing works.
PLEASE HELP!!!