Configuration Tp-Link TD-W8961N
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Configuration Tp-Link TD-W8961N
Model :
Hardware Version :
Firmware Version :
ISP :
Hello everyone,
i write from Italy
I apologize for my english
I'm trying to configure this modem router http://www.tp-link.it/products/details/cat-15_TD-W8961N.html
the firmware is up to date
I'm using as a line: infostrada
Now following the setup (wizard) I'm going to set the parameters:
PVC4
VPI - 8
VPI - 35
Isp -PPPoA / PPPoE
Encapsulation - PPPoE-LLc
1-how do I type this encapsulation or should I use PPPoA VC-Mux?
2-in-wizard mode the router modem offers configuration types: innfostrada 1 and infostrada 2, which one to choose?
The difference is that if I go to set the first, the parameters are the ones I put, While if I put the second then the parameter of encapsulation changes in PPPoA VC-Mux
3-a strange thing I can not understand is, when I switch off to restart the modem / router the parameters change and I'm in the configuration screen these values:
PVC0
VPI-1
VCI - 32
Encapsulation - bridge mode
Bridge Mode - 1483 Bridged IP LLC
Why do the parameters change? (I then go to modify manually)
How can i solve ???
thanks
Hardware Version :
Firmware Version :
ISP :
Hello everyone,
i write from Italy
I apologize for my english
I'm trying to configure this modem router http://www.tp-link.it/products/details/cat-15_TD-W8961N.html
the firmware is up to date
I'm using as a line: infostrada
Now following the setup (wizard) I'm going to set the parameters:
PVC4
VPI - 8
VPI - 35
Isp -PPPoA / PPPoE
Encapsulation - PPPoE-LLc
1-how do I type this encapsulation or should I use PPPoA VC-Mux?
2-in-wizard mode the router modem offers configuration types: innfostrada 1 and infostrada 2, which one to choose?
The difference is that if I go to set the first, the parameters are the ones I put, While if I put the second then the parameter of encapsulation changes in PPPoA VC-Mux
3-a strange thing I can not understand is, when I switch off to restart the modem / router the parameters change and I'm in the configuration screen these values:
PVC0
VPI-1
VCI - 32
Encapsulation - bridge mode
Bridge Mode - 1483 Bridged IP LLC
Why do the parameters change? (I then go to modify manually)
How can i solve ???
thanks