Pharos Wireless Bridges
TP-Link Pharos Outdoor CPEs are dedicated to Point-to-(Multi)Point transmission, ideal for short-to-medium range wireless communication among two or more locations. Anything related to Pharos Outdoor CPEs, welcome to ask questions, join discussions and share your experience/knowledge here.
Pharos Wireless Bridges
With a high transmit power and antenna gain, TP-Link Pharos Products are perfect for long-distance wireless connections. The communication distance ranges from several kilometers to dozens of kilomete
By
Jocelyn
Jocelyn0Helpful
4799Views
SSH is enabled. SSH to device. Login with admin Try to issue reboot command Get "operation not permitted" Try with sudo, get sudo not found
1Helpful
67Views
Hi all, Hoping for some assistance. I have 2 CPE510s set in a AP/Client mode. On the AP side, it is connected to an MR550 4G router, which also holds the DHCP and the whole network. They are only play
Outdoor Wi-Fi Solution
By
smunisto
· Latest post 2 weeks ago
by Gabriel-TP
0Helpful
124Views
As the subject said, how many 4MP cameras can a CPE510 using PTMP connection? The farthest one would be around 1km 1 CPE510 = ? 4mp camera
Outdoor Wi-Fi SolutionRepeater/Bridge ModeNetwork Connectivitycctv
By
Jkyong
· Latest post 2 weeks ago
by Gabriel-TP
0Helpful
118Views
So, I have CPE710 as AP and Client. Client Side there are 50+ users and 4 NVRs. And AP Side there is DHCP Controller - Fortinet Fortigate. This is AP This is Client. Can you guys help me solve the iss
Network Connectivity
By
SagarThummar
· Latest post 2026-05-01 07:08:42
by Gabriel-TP
0Helpful
219Views
Today I tried to set up CPE710 as client. At Survey I couldn't finde any SSID. I tried my home router and hot spot S23 Ultra. No SSID found. Setting are on both 5Mhz. The Status page shows N/A for sig
By
ddarjo
· Latest post 2026-04-28 02:31:10
by Vincent-TP
2Helpful
343Views
I would like to connect microphone at one end and speaker at the other end at a distance of four kms . Can we achieve this using cpe210 at both ends. If possible how to do it. The problem is to transm
Presales
0Helpful
254Views
I found a bug on WEB UI of the CPE710 with lastest UN firmware. Signal strength of stations are shown buggy, all stations have same values if you choose to show it separately (chain0/chain1). If you s
Firmware UpdateOutdoor Wi-Fi Solution
By
phongtom
· Latest post 2026-04-20 08:59:46
by Vincent-TP
0Helpful
155Views
Hi everyone, I’m currently using a TP-Link router (Archer series) at home for gaming, streaming, and remote work. Recently I configured a VPN directly on the router to secure all connected devices and
Pharos ControlRepeater/Bridge ModeNetwork ConnectivityFirmware Updatevpn
By
bazhenm199
· Latest post 2026-04-15 06:55:23
by Vincent-TP
0Helpful
508Views
I have an outdoor Wireless Bridge set up with 2 CPE210 units. They are located 300 feet apart with direct line of sight with no obstacles. The CPE210 which is set up as the Access Point is directly ha
Pharos ControlOutdoor Wi-Fi SolutionRepeater/Bridge ModeNetwork Connectivity
0Helpful
532Views
You’re close, but the calculation is a bit misunderstood. The 32 dBm refers to the radio’s transmit power, while the 10 dBi is the antenna gain. These values don’t mean the device is transmitting 42 d
By
maaz123
· Latest post 2026-03-17 03:44:55
by Vincent-TP
0Helpful
304Views
Hello, I am using TP-Link CPE610. I want to configure it using code or script instead of web interface. Is there any API or command method available? Write to Lovei Love
0Helpful
355Views