Home Network Community > Wi-Fi Routers > Access Point Mode, Internet LED continuously Flashing but Connected to Internet
< Wi-Fi Routers

Access Point Mode, Internet LED continuously Flashing but Connected to Internet

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Access Point Mode, Internet LED continuously Flashing but Connected to Internet

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Access Point Mode, Internet LED continuously Flashing but Connected to Internet
Access Point Mode, Internet LED continuously Flashing but Connected to Internet
2023-09-11 09:30:08 - last edited 2023-09-11 09:32:26
Model: TL-WR902AC  
Hardware Version: V3
Firmware Version: 0.9.1 0.4 v0089.0 Build 230223 Rel.5237n(4555)

Hi,

 

I use this Device in Access Point Mode. LAN Cable from Router is connected und all wireless connected Devices have Internet Access. But LED for indicating Internet Connection is continuously flashing!

I recently Upgraded to the mentioned Firmware. Before everything was fine = no flashing!

Additional Information. The Cable is not connected directly to Router, there is a Switch in between!

 

 

Kind regards,

Jens

  0      
 
  0      
 
#1
Options
8 Reply
Re:Access Point Mode, Internet LED continuously Flashing but Connected to Internet
2023-09-12 03:26:33

  @JensWagner 

 

Hi, thank you very much for posting on TP-Link Community.

Could you please double check if it is Power LED or Internet LED keeps flashing? normally the Internet LED doesn't have a flashing status.

Please also try removing the cable between WR902AC and the switch, and then plug it back. Also try a different port or try connecting directly to main router to see if it makes any difference.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#2
Options
Re:Access Point Mode, Internet LED continuously Flashing but Connected to Internet
2023-09-12 07:44:09

  @Sunshine 

Hi  Thanks for trying to help me!

 

I think this feature was new in the mentioned new Firmware. You'll find this Information only in Quick Installation Guide!

And yes it is the Internet LED!

 

I did connect to the Router directly and it's still the same issue!

 

Quick Guide

  0  
  0  
#3
Options
Re:Access Point Mode, Internet LED continuously Flashing but Connected to Internet
2023-09-13 06:16:11

  @JensWagner 

 

Hi, thank you very much for the feedback about Quick Installation Guide, I checked the LED explanations from user guide before, and I will report the difference to related team to confirm and update it based on the latest version.

 

Regarding the Internet LED issue now, are you using the WAN/LAN port on TL-WR902AC to connect the router or switch? If so, please let us know the brand and model of your router and switch, we will report to senior engineer for testing.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#4
Options
Re:Access Point Mode, Internet LED continuously Flashing but Connected to Internet
2023-09-13 07:18:49

  @Sunshine 

Hi,

 

yes I use the WAN/LAN Port to Connect the TL-WR902AC to Internet tested by

  1. Switch (Netgear GS605 v4 5-Port Switch)
  2. Router (Fritzbox 7590)

and in both cases I got the same Issue!

 

Kind regards

 

  0  
  0  
#5
Options
Re:Access Point Mode, Internet LED continuously Flashing but Connected to Internet
2023-09-13 13:54:06
Not really an "issue" (everything working fine) but exact same observation here (blinking Internet LED) in AP mode. Fresh installed OOTB. I installed the TL-WR902AC because some small devices refuse to connect to my main AP EAP615-Wall (and apparently they successfully connect to TL-WR902AC) Firmware version:0.9.1 0.3 v0089.0 Build 230506 Rel.55329n(4555) Hardware version:TL-WR902AC v4 00000001 Switch is TL-SG2008 v4.0 Router is ER7206 v1.0 Both are adopted using OC-200 Hope this helps, kind regards
  0  
  0  
#6
Options
Re:Access Point Mode, Internet LED continuously Flashing but Connected to Internet
2023-09-15 03:17:50

  @arneto 

 

Thank you very much for the feedback.

We've reported it to our senior engineer to confirm whether the LED status is correct or not, once there is any further update, I will keep you informed.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  1  
  1  
#7
Options
Re:Access Point Mode, Internet LED continuously Flashing but Connected to Internet
2024-01-05 14:19:33

  @Sunshine 

Hello everybody

a couple of month have passed - is there an update on the blinking Internet LED in AP mode ?
Same problem with my device

 

Similar config as described above:

TL-WR902AC (FW: 0.9.1 0.4 v0089.0 Build 230223 Rel.5237n(4555), HW: TL-WR902AC v3 00000001)
connected to NetGear GS105 Switch

connected to Fritzbox 7490

 

  0  
  0  
#8
Options
Re:Access Point Mode, Internet LED continuously Flashing but Connected to Internet
2024-01-08 02:18:20

  @t_aus_w 

 

Hi, the issue will be resolved in the next firmware release but we don't have advanced norice about the ETA, it is recommended to monitor new firmware update via the router Web GUI or TP-Link official website.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#9
Options

Information

Helpful: 0

Views: 2095

Replies: 8

About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.