Connection Issue
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Just had full fibre 900 installed and have tried everything to get the Archer connected to the fibre box but I am getting nowhere. Has anyone managed to get this working with full fibre connection?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
If no internet access with your router, you may try the following troubleshooting
Case One: Orange/Red Internet light on the router:
1. Unplug your router from the modem, connect your PC directly into the modem to verify the Internet status of your ISP.
2. Reboot the ISP Modem and the Router, you must firstly power on the Router, once the router's fully powered on, power on the modem.
3. Login to the web UI via http://tplinkwifi.net and set it up following the Quick Setup.
4. If your PC has Internet when connected to the modem, but the Router still doesn't, please go to Advanced > Network > Internet > Mac Clone to clone the mac address of your PC. This FAQ contains detailed instructions of Mac Clone: https://www.tp-link.com/support/faq/2264/
Case Two: Green Internet light on the router:
1. Login to the web management interface of the router (http://tplinkwifi.net), go to Advanced > Network > Internet > Advanced Settings > Change the DNS Servers into 1.1.1.1 and 8.8.8.8.
2. Reboot the ISP Modem and the Router, you must firstly power on the Router, once the router's fully powered on, power on the modem.
You may check more detailed instructions following the FAQ: What should I do if I cannot access the internet through Wi-Fi router?
- Copy Link
- Report Inappropriate Content
If no internet access with your router, you may try the following troubleshooting
Case One: Orange/Red Internet light on the router:
1. Unplug your router from the modem, connect your PC directly into the modem to verify the Internet status of your ISP.
2. Reboot the ISP Modem and the Router, you must firstly power on the Router, once the router's fully powered on, power on the modem.
3. Login to the web UI via http://tplinkwifi.net and set it up following the Quick Setup.
4. If your PC has Internet when connected to the modem, but the Router still doesn't, please go to Advanced > Network > Internet > Mac Clone to clone the mac address of your PC. This FAQ contains detailed instructions of Mac Clone: https://www.tp-link.com/support/faq/2264/
Case Two: Green Internet light on the router:
1. Login to the web management interface of the router (http://tplinkwifi.net), go to Advanced > Network > Internet > Advanced Settings > Change the DNS Servers into 1.1.1.1 and 8.8.8.8.
2. Reboot the ISP Modem and the Router, you must firstly power on the Router, once the router's fully powered on, power on the modem.
You may check more detailed instructions following the FAQ: What should I do if I cannot access the internet through Wi-Fi router?
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 223
Replies: 1
Voters 0
No one has voted for it yet.