Wi-Fi interruptions

Wi-Fi interruptions

Wi-Fi interruptions
Wi-Fi interruptions
2024-03-26 20:47:51 - last edited 2024-04-08 09:06:26
Model: Archer C80  
Hardware Version: V2
Firmware Version: 1.13.2 Build 230824 Rel.75032n(4555)

Wi-Fi interruptions, the internet via cable is excellent, devices connected via Wi-Fi have problems with connection loss and speed. A week ago there were no problems, on the mobile phone the wifi speed was 93 Mbps. Today does not exceed 10 Mbps. And frequent Wi-Fi signal interruptions

 

1 EXCEPTION Auto update prepare to upgrade, user call download firmware service.

2 INFO 0days, 00:00:08, [tmpd]register tmp app, type: 1

3 INFO 0days, 00:00:08, [portal]portal init

4 INFO 0days, 00:00:08, [lan]LAN: Set interface br-lan0 ip=192.168.0.1 netmask 255.255.255.0.

5 INFO 0days, 00:00:08, [tmpd]register tmp app, type: 2

6 INFO 0days, 00:00:09, [tmpd]register tmp app, type: 4

7 INFO 0days, 00:00:20, [DSLite]Dslite disable

8 INFO 0days, 00:00:20, [portal]portal not enabled

9 INFO 0days, 00:00:20, [portal]portal stop

10 INFO 0days, 00:00:20, [httpd]Http server start!

11 INFO 0days, 00:00:27, [wan]Wan ethernet port plug on.

12 INFO 0days, 00:00:28, [pppoe]try special dial type 0

13 INFO 0days, 00:00:28, [pppoe]TX PADI

14 INFO 0days, 00:00:28, [pppoe]RX PADO, AC-NAME=Jun_BRAS1, AC-MAC=88-28-fb-2e-97-3c

15 INFO 0days, 00:00:28, [pppoe]TX PADR

16 INFO 0days, 00:00:28, [pppoe]RX PADS[session=0c3d]

17 INFO 0days, 00:00:28, [ppp][LCP]RX CONFIGURE_REQUEST

18 INFO 0days, 00:00:28, [ppp][LCP]TX CONFIGURE_REQUEST

19 INFO 0days, 00:00:28, [ppp][LCP]TX CONFIGURE_ACK[mru=1492, auth=C023/5, magic=1FBA3209]

20 INFO 0days, 00:00:28, [ppp][LCP]RX CONFIGURE_ACK[mru=1480, magic=00000357]

21 INFO 0days, 00:00:28, [ppp][PAP]TX AUTHENTICATION_REQUEST

22 INFO 0days, 00:00:28, [ppp][PAP]RX AUTHENTICATION_ACK

23 INFO 0days, 00:00:29, [ppp][IPCP]TX CONFIGURE_REQUEST

24 INFO 0days, 00:00:29, [ppp][IPCP]RX CONFIGURE_REQUEST

25 INFO 0days, 00:00:29, [ppp][IPCP]TX CONFIGURE_ACK[ip=31.43.224.1]

26 INFO 0days, 00:00:29, [ppp][IPCP]RX CONFIGURE_NAK

27 INFO 0days, 00:00:29, [ppp][IPCP]TX CONFIGURE_REQUEST

28 INFO 0days, 00:00:29, [ppp][IPCP]RX CONFIGURE_ACK[ip=31.43.229.233, manu-dns=192.168.170.30/192.168.170.102]

29 INFO 0days, 00:00:30, [pppoe]ppp0 set localIp 31.43.229.233 remoteIp 31.43.224.1 mtu 1480

30 INFO 0days, 00:00:30, [wan]advanced ddns -wanChanged

31 INFO 0days, 00:00:30, [wan]systool sntpc -sntpRequest

32 INFO 0days, 00:00:30, [dnsproxy]Register Dns Detect

33 INFO 0days, 00:00:30, [dnsproxy]Register primary = 0x1eaaa8c0, secondary = 0x66aaa8c0

34 ERROR 0days, 00:00:30, [inetd]INETD: select error, abort.

35 WARNING 0days, 00:00:30, [cwmp]cwmp is not start

36 WARNING 0days, 00:00:37, [dhcps]Lease host name not found.

  0      
  0      
#1
Options
1 Accepted Solution
Re:Wi-Fi interruptions-Solution
2024-03-27 10:12:37 - last edited 2024-04-08 09:06:26

  @Sunshine 

I tried setting different channels for the 2.4 GHz network (1, 6, 11). But it didn't help.
Tried turning off 5GHz wireless, that didn't help either.
I turned off OneMesh (I have no other devices that use this technology), which also did not help.

Analysis of the channels of wireless networks shows that there are practically no other devices occupying the channels (which can be seen in the attached file)

Due to the fact that the wireless network was constantly interrupted, there was only one device connected to it, I disconnected all the others to find out what the problem was.
 

I have to clarify. I am in the same room as the router (a few meters away).

I managed to fix it - by resetting to factory settings and reconfiguring the Internet connection

I will observe what will happen next, the experience is quite unpleasant because I did not expect that literally in a week everything would fall apart

File:
wifi_analyze.jpgDownload
Recommended Solution
  0  
  0  
#3
Options
3 Reply
Re:Wi-Fi interruptions
2024-03-27 08:01:50

  @MykhailoRos 

 

Hi, for wireless client devices unstable:

    1) Make sure the Router is properly placed, it should be put in open area instead of inside a cabinet or shelf.

    2) Login the web management interface of the Router, go to Advanced > Wireless > Wireless Settings, change the wireless channel into another one.

    3) For 2.4GHz wireless client devices, adjust 2.4GHz channel width into 20MHz, for 5G wireless client devices, adjust 5GHz channel width into 80MHz or 40MHz to avoid interference.

  0  
  0  
#2
Options
Re:Wi-Fi interruptions-Solution
2024-03-27 10:12:37 - last edited 2024-04-08 09:06:26

  @Sunshine 

I tried setting different channels for the 2.4 GHz network (1, 6, 11). But it didn't help.
Tried turning off 5GHz wireless, that didn't help either.
I turned off OneMesh (I have no other devices that use this technology), which also did not help.

Analysis of the channels of wireless networks shows that there are practically no other devices occupying the channels (which can be seen in the attached file)

Due to the fact that the wireless network was constantly interrupted, there was only one device connected to it, I disconnected all the others to find out what the problem was.
 

I have to clarify. I am in the same room as the router (a few meters away).

I managed to fix it - by resetting to factory settings and reconfiguring the Internet connection

I will observe what will happen next, the experience is quite unpleasant because I did not expect that literally in a week everything would fall apart

File:
wifi_analyze.jpgDownload
Recommended Solution
  0  
  0  
#3
Options
Re:Wi-Fi interruptions
2024-03-29 03:05:09

  @MykhailoRos 

 

Hi, thanks a lot for the update, hope the WiFi connection became stable

  0  
  0  
#4
Options

Information

Helpful: 0

Views: 159

Replies: 3

Related Articles