This Article Applies to:  EAP610_V2 | EAP610-Outdoor_V1 | Fully Adapted to Omada SDN Controller v5.14

 

Release Notes:

 

New Feature/Enhancement:

 

1. Add support to display the configuration synchronization status between Controller and device.

2. Add support for Inform subscription mechanism.

3. Add support for cluster deployment in Controller mode (CBC does not support).

4. Add support for centralized proxy of Radius.

5. Add support for OWE.

6. Add support for roaming optimization.

7. Add support for power deployment optimization.

8. Add support to custom channel collection.

9. Add support to upgrade through cloud in standalone mode.

10. Add support for Portal Logout.

11. Add support to disable HTTP protocol in Standalone mode.

12. Add support for DHCP Option43.

13. Optimize rate selection algorithm.

14. Optimize the configuration of Beacon Interval.

15. Add support for multiple Radius servers when using MAC-Based Authentication.

16. Add support for community security prompts when using SNMP.

17. Add support NAS ID configuration when using enterprise encryption.

18. Add support for DNS Queries.

19. Add support for data traffic restriction when using portal authentication in Controller mode.

20. Add support to configure the Device Name in Controller mode. 

21. Add support to view status information and simple configuration through standalone management page when devices managed by the Controller.

22. Add support to display the correct maximum associated clients range according to the model in Controller mode.

23. Add support to display the actual working bandwidth of the EAP.

24. Add support to configure wireless mode in Controller mode.

25. Add support for multicast and broadcast data statistics.

26. Optimized some security issues.

27. Improves stability.

28. Enhances security protection.

29. Supports 1024 PPSK entries.

30. Supports disabling HTTP, HTTPS and APP discovery under Controller mode.

31. Supports Non-stick Roaming function.

32. Supports authentication type of EKMS and Generic Radius with Unbond MAC for PPSK with Radius.

33. Supports Multicast Filtering with IPv6 address.

34. Supports reporting default OFDMA status.

35. Fixes some issues of AP working abnormally when 802.11r and Dynamic VLAN are both enabled.

36. Fixes some known issues with WLAN Optimization.

37. Supports Multicast/Broadcast Rate Limit

38. Supports Standalone Mesh

39. Improves support for more SSH commands

40. Fixes the issue that URL Filtering cannot work properly after TLS1.3 is enabled in the browser.

41. Fixes the issue that HTTPS Redirection and Pre-Authentication Access don’t take effect in some special scenarios.

 

Firmware Download

 

Attention

1. Please be sure you have read the Beta Test Agreement before upgrading the Pre-release firmware!

2. Please ensure that you know which version (EU/US/CA/JP/EG) you shall use on your Omada EAP devices before you download the following EAP firmware.

 

EAP610_V2_1.3.0 Build_20240807 Rel.78823 (Pre-release version)

EAP610-Outdoor_V1_1.3.0_Build_20240807 Rel.78824 (pre-release version)

 

Notes:

(1) The above firmware is applied to EAP610 V2 and EAP610-Outdoor V1.

(2) Your device’s configuration won’t be lost after upgrading.

(3) The above firmware is fully adapted to Omada SDN Controller v5.14

 

Feedback

 

Any further feedback on the new firmware, please feel free to comment below or start a new thread from HERE.

To get better assistance, you may check Tips For Efficiently Reporting an Issue In The Community.

 

When reporting an issue, especially it's about firmware upgrade, it's suggested to include the following info:

• Management mode (Controller or Standalone)
• Device Model(s) and Hardware
• Device Firmware (previous and current)

 

Thank you in advance for your great cooperation and support.

 

Recommended Threads

 

Experience the Latest Omada EAP Firmware - Trial Available Here, Subscribe for Updates!

Current Available Solutions to Omada EAP Related Issues [Constantly Updated]

Get the Latest Omada SDN Controller Releases Here - Subscribe for Updates