PC remains on Specific IP

PC remains on Specific IP

PC remains on Specific IP
PC remains on Specific IP
2025-07-29 05:02:43 - last edited 2025-08-04 00:57:24
Model: SG2428LP  
Hardware Version: V5
Firmware Version: 5.20.11 Build 20250307 Rel.72554

Hi,

Hardware:

OC200,

ER605 v2.0

SG2428P v5.20

some AP(265HD, 235).

 

I have 4 VLANs:

1 - 192.168.0.x (infrastructure)

10 - 192.168.10.x (PCs)

20 -

30 - 

 

and working OK for almost a year now.

Perhaps I didn't noticed, but my leading Ubuntu pc that should have been on IP 192.168.10.11 (part of PC VLAN),

got 192.168.0.12. I noticed that only when I added another PC to VLAN1.

No matter what I did, it remained at 192.168.0.12.

 

Trials:

1. Connect other PC to that specific wall outlet - assigned another IP

2. Connect wall outlet to a different port on switch - assisgned same IP.

3. replaced the SSD with a fresh installation of Ubuntu - assigned same IP.

3. Verified that relevant port (port11) is set to "All" (vlans) - assigned same IP.

4. defined VLAN10 on port11 assigned same IP.

5. verify that DHCP reservation is set to requested IP - still assigned same IP.

6. delete DHCP reservation - assigned same IP.

7. Verfied that there is no IP-MAC bind - still same IP.

8. multiple reboots, and disconnecting wall jack connector - remained the same.

 

I'm 100% positive that it has something to do with siwtch that preserves this IP, and not from PC side, or specific port.

 

please help :) 

 

Guy

 

  0      
  0      
#1
Options
1 Accepted Solution
Re:PC remains on Specific IP-Solution
2025-08-01 20:59:44 - last edited 2025-08-04 00:57:24

  @Clive_A 

 

Thank you for a quick response.

Problem sovled:

1. Port's PROFILE was defined as "All", which it default / Native / Untagged was to 192.168.0.x

2. But Computer's config was defined as "PC" , 192.168.10.i (Static IP)

 

and Port's config wins....

 

So the solution was do define port also as PC Profile that belongs it to 192.168.10.x

 

All good now.

Guy

Recommended Solution
  0  
  0  
#3
Options
2 Reply
Re:PC remains on Specific IP
2025-07-31 01:28:25

  @guyd2 

Diagram of the network and Wireshark to see if it is the router that assigns the IP. 

How to capture packets using Wireshark on SMB router or switch

  1  
  1  
#2
Options
Re:PC remains on Specific IP-Solution
2025-08-01 20:59:44 - last edited 2025-08-04 00:57:24

  @Clive_A 

 

Thank you for a quick response.

Problem sovled:

1. Port's PROFILE was defined as "All", which it default / Native / Untagged was to 192.168.0.x

2. But Computer's config was defined as "PC" , 192.168.10.i (Static IP)

 

and Port's config wins....

 

So the solution was do define port also as PC Profile that belongs it to 192.168.10.x

 

All good now.

Guy

Recommended Solution
  0  
  0  
#3
Options