Home Network CommunityWi-Fi Routers Archer AX53(EU)_V1 no Wireless after Firmware 1.5.4
Wi-Fi Routers

Archer AX53(EU)_V1 no Wireless after Firmware 1.5.4

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Archer AX53(EU)_V1 no Wireless after Firmware 1.5.4

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Archer AX53(EU)_V1 no Wireless after Firmware 1.5.4
Archer AX53(EU)_V1 no Wireless after Firmware 1.5.4
2025-10-24 20:51:46 - last edited 2025-10-25 07:19:39
Model: Archer AX53  
Hardware Version:
Firmware Version:

Hi. Huge problem. After updating to firmware Archer AX53(EU)_V1_1.5.4 Build 20250926 i can't connect to the wireless network with any device. The settings are the same. I can connect wireless to the Range Extender TL-WA850RE witch is set to Access Point but only with the phones, not with the laptops. On the Range Extender page it says "Internet Status: Disconnected". I don't understand how the firmware messed up everything and I don't know what to do. Please help. Thanks

  0      
0
#1
Options
1 Accepted Solution
Re:Archer AX53(EU)_V1 no Wireless after Firmware 1.5.4-Solution
2025-10-24 22:11:28 - last edited 2025-10-25 07:19:39

  @Neo007 

 

It's hard to tell what has happend after firmware update.

Usually these things go smooth, if you don't interrupt the power supply during the procedure.

There's two cases:

1.You still have access to the router's WebGUI - login and double check your wireless settings.

2.You don't have access to the router's WebGUI.

 

In both cases if it still doesn't work as expected, reset the router to its factory defaults and re-configure from scratch.

To hard reset, power on the router and press and hold the reset button with a paperclip for 10 seconds or until the lights flash, then wait for it to reboot to its default settings.

If this was helpful click on the arrow pointing upward to make it blue. If this solves your issue, click the star to make it blue as a "Recommended Solution". BTC:149wubkkfoLmNDjDbiTxx4ZU8mpcMA5CJt
Recommended Solution
  1  
1
#2
Options
2 Reply
Re:Archer AX53(EU)_V1 no Wireless after Firmware 1.5.4-Solution
2025-10-24 22:11:28 - last edited 2025-10-25 07:19:39

  @Neo007 

 

It's hard to tell what has happend after firmware update.

Usually these things go smooth, if you don't interrupt the power supply during the procedure.

There's two cases:

1.You still have access to the router's WebGUI - login and double check your wireless settings.

2.You don't have access to the router's WebGUI.

 

In both cases if it still doesn't work as expected, reset the router to its factory defaults and re-configure from scratch.

To hard reset, power on the router and press and hold the reset button with a paperclip for 10 seconds or until the lights flash, then wait for it to reboot to its default settings.

If this was helpful click on the arrow pointing upward to make it blue. If this solves your issue, click the star to make it blue as a "Recommended Solution". BTC:149wubkkfoLmNDjDbiTxx4ZU8mpcMA5CJt
Recommended Solution
  1  
1
#2
Options
Re:Archer AX53(EU)_V1 no Wireless after Firmware 1.5.4
2025-10-25 07:20:00

  @terziyski Restore worked. Thanks

  0  
0
#3
Options

Information

Helpful: 0

Views: 979

Replies: 2