Remove mesh connection/downlink
Team,
I have 2 EAP's connected via mesh - one is EAP225-outdoor and the other EAP245.
I would like to remove this mesh connection and switch to wired connections.
However, even while the EAP has a wired connection and is rebooted, it keeps coming back with the mesh connection.
I also noted there is no icon below the action part (see attached screenshot).
How do I remove this mesh connection?
With warm regards - Will
Hi @ITV
Thanks for posting here.
To disable mesh feature, go to Network Config > General Settings >Site Settings > Wireless Features:
However, even while the EAP has a wired connection and is rebooted, it keeps coming back with the mesh connection.
>>>Under normal circumstances, with a wired connection, the EAP will not switch to wireless bridging. This usually happens when the wired connection is disconnected. Please carefully check your Ethernet cable connection.
Hi @ITV
Thanks for posting here.
To disable mesh feature, go to Network Config > General Settings >Site Settings > Wireless Features:
However, even while the EAP has a wired connection and is rebooted, it keeps coming back with the mesh connection.
>>>Under normal circumstances, with a wired connection, the EAP will not switch to wireless bridging. This usually happens when the wired connection is disconnected. Please carefully check your Ethernet cable connection.