Overview The purpose of this Early Access post is to offer you with a chance to experience the new features and updates of TP-Link Omada products in advance, and also give us TP-Link the opportunity t
12Helpful
82991Views
I have recently experienced a power outage, during the firmware update process of my EAP225-Outdoor device. Now the device is not starting up. I am quite ceratin, because the LED remains solid after t
0Helpful
298Views
Hi all, For various reasons my Omada controller is running in a container on a computer connected via Wifi, I know it's not an ideal situation but until the cabling situation is sorted it is what it i
0Helpful
391Views
hello everybody, i am trying to set up an EOGRE tunnel between an Omada Eap (site 1) and a raspberry pi (site 2). Does anyone know of a good beginner-friendly guide or tutorial? My goal is to terminat
0Helpful
126Views
Hi! Im having this problem on a location where i have many EAP-773's running. 6ghz is disabled. All new copper CAT-6 cabling, SG2210MP POE switch, OC200 controller. Everything is on latest firmware. I
By
Ltcdata
0Helpful
51Views
Hi everyone I have two models of tp-link APs EAP115-Wall (with diffrent FWs) and EAP235-Wall (3.1.1 Build 20230414 Rel. 54637(4555)). On my APs I have WiFi config like this: ssid vlan id myssid 0 myss
0Helpful
314Views
Hi I have just added 2 EAP 775 wall to my network. I just want to know if an SSID is created only using 6Ghz. Should that work ? As I tired doing that but the SSID created with only 6ghz doesnt even s
4Helpful
1258Views
Dear TP-Link Team, I noticed that the (blue) LED on my EAP787 V1.0 (Firmware 1.5.2) no longer lights up. The AP is connected to a SG3428XPP-M2 switch on Port 1 (PoE++). I forced provision, reset the A
0Helpful
306Views
The EAP725-Wall for Australia comes in a box label "EU/1.20" but inside the box the device claims it is "AU v1.0" and firmware version 1.1.3. Then if you upgrade the firmware to the latest available 1
By
whereisaaron
· Latest post Friday
by Vincent-TP
0Helpful
177Views
This Article Applies To: EAP772 V1, Fully Adapted to Omada SDN Controller v6.1 or above; EAP773 V1, Fully Adapted to Omada SDN Controller v6.1 or above; EAP783 V1, Fully Adapted to Omada SDN Controlle
36Helpful
10993Views
In reviewing the logs, I see that some 15 minutes ago the EAP detected a radar and changed its channel from 100 to 108. However, the channel change supposedly did not occur. Using the Wi-Fi Analyzer t
By
jra11500
0Helpful
69Views
Hello, I have a eap211 bridge kit. If I switch the master eao to outdoor, the client eap got disconnected. It is not possible to change the wireless settings from the client. So what I have to do, to
By
daniel_hainich
· Latest post Thursday
by Nathan-TP
0Helpful
86Views