Switches
I have a Linux server connected to a LAG port group on my Switch, which is configured as a trunk port as all my VLANS need to be allowed through it for various services. The native VLAN is default VLA
VLAN & Multi-NetworksConfigurationLAG
0Helpful
348Views
I would like to make LAG connection between SX3008F and SG3452XMPP (both running latest stable firmware) via SM5110-SR modules. If I use only one module on both sides I get stable 10 Gbit connection w
LAG
0Helpful
696Views
My system has the following connected to the switch. EERO modem (port 1) synology NAS (port 2,3 bonded) - PC (port 3) tv (port 4). I want to set up link adregation. However, wehen I turn it on in the
ConfigurationNetwork ConnectivityLAG
0Helpful
819Views
Hello, SG3428X-M2 v1.20 since firmware 1.20.7 Build 20250328 I had been having an issue where one of my SFP modules that is in a static LAG just drops out and the switch needs to be restarted. i updat
SFPLAG
1Helpful
1322Views
Hi, I was setting up some link aggregations and just realised that the SG3428x-m2 is limited to 8 link aggregation groups. Unfortunately that's not enough for me as i would be actually needing at leas
ConfigurationLAGNetwork Connectivity
2Helpful
2064Views
Hello, I am running into issues where after setting up VLAN's, all inter-vlan traffic is going through the router. Now, this is something I should have known but I am not a network engineer and am lea
VLAN & Multi-NetworksNetwork ConnectivitySFPLAG
By
WholesomeTRex
· Latest post 2025-03-14 01:10:51
by Clive_A
2Helpful
3433Views
TroubleshootingTroubleshooting Link Aggregation LAG/LACP Not Working
This Article Applies to: Omada switch with Static LAG and LACP supported. Issue Description: Static LAG or LACP does not link up or aggregate the speed. Troubleshooting: When LACP (Link Aggregation Co
LAG
By
Clive_A
Clive_A0Helpful
4951Views
Hi guys, Someone can bring me a light? I've an switch SX6632YF connected to Fortigate 80F and it work if connected directly, but I need to set up LACP mode because we plan to use agreggated ports to g
LAGSFP
2Helpful
3278Views
Hi all I am struggling to get the LAG working in my environment. I have ER605, OC200, 2x SG2008P and 2x EAP245. Also I have HP MicroServer Gen8 with TrueNAS CORE running on it with number of Jails. I
LAGConfigurationVLAN & Multi-Networks
3Helpful
1611Views
Hi. New to this forum and using my first TP-Link device. It is the SG3210X-MP switch. I have used a bit of Netgear, but mainly use Cisco SG2xx/3xx and CBS250/350 managed switches. The part that I have
ConfigurationLAG
2Helpful
1212Views
I'm trying to set up a 4 port LAG between these two switches. On the T1600G-28PS I have 1GB SFP in ports 25-28 and I've linked these to ports 5-8 on the SG3210XHP-M2. I've tried static LAG and LACP (w
ConfigurationLAGNetwork Connectivity
3Helpful
1696Views
Hello, I am having a weird issue, I have a 2 switches that have 2 10Gb LAG connections between the two, the issue is that on the remote switch none of the clients that are plugged into it are showing
LAGConfiguration
3Helpful
1200Views