T1600G-18TS vlans and dhcp - fixed
Hi, new user here :)
I just bought a T1600G-18TS for my personnals needs (well they are closer to pro needs than random end-user, hence the smart switch) and I'm unable to configure it as I would like.
Since the configuration is done using a vlan (vlan 1), I want this one isolated to a single port (n°5). That's the easy part (and done).
I've connected my DSL router to port 1. Since my dsl router is providing DHCP, I want to use that DHCP for the public vlan (as of now vlan10).
I want to connect 3 devices to the the smart switch that will use my router DHCP service on the vlan 10. I failed to make this happen.
What I have done so far :
1) create the VLAN 10 (named public) and set it as untagged on all the port I want to use that network (port 1 to 4)
2) Create an interface on that vlan as DHCP but the interface is marked as "down"
3) Enable the DHCP relay
4) Enable the "DHCP Interface Relay" on vlan 10 and setup the dhcp server IP address
The idea here that the smart switch behave as a plain dumb switch. But all my attempt failed.
On port 6-16, I plan on connecting small linux boxes that will use tagged networking for a private vlan and the public vlan. But since the 1st part still fail, I havent started on this just yet. I know how to configure the linux boxes for tagged networking, but since what I expected to be the easy part fail, I'm kind of worried here too.
Any help would be more than welcome