Business Community > Routers > Dutch KPN setting
< Routers

Dutch KPN setting

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Dutch KPN setting

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Dutch KPN setting
Dutch KPN setting
2021-01-17 15:53:50 - last edited 2021-08-09 08:50:04
Model: ER7206 (TL-ER7206)  
Hardware Version: V1
Firmware Version:

Dear ....,

 

I would like to set-up this router, but I can't get connection with my ISP (KPN in the Netherlands). I try several hours and several days ;-)

They provide this information:

1. PPPoE over VLAN 6 (802.1q)

2. PPPoE authentication PAP (internet / internet)

3. Packet size (mtu) 1500 bytes (rfc4638)

4. IPv4 adress + DNS servers over PPPoE

5. IPv6 adress range + DNS server (IPv6) over DHCPv6-PD request (in PPPoE). Use adress of range from router

 

Steps 1., 2. and 3. I can do but setps 4. and 5. I can't see any locations where I can put in these settings.

 

Can some one provide print screen how to get this router working?

 

Best Regards,

Bart

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:Dutch KPN setting-Solution
2021-08-07 09:12:56 - last edited 2021-08-09 08:50:04

@BartD. 

 

This morning I saw an update for my TL-R605 and TL-ER7206 with IPv6 functionality added! Since then I've successfully connected to the KPN fiber network! Here are my settings:

Hope this helps, goodluck!

Recommended Solution
  3  
  3  
#7
Options
8 Reply
Re:Dutch KPN setting
2021-01-18 08:44:53 - last edited 2021-04-18 10:02:07

Dear @BartD,

 

Are you configuring the TL-ER7206 via its web interface or via Omada Controller?

 

4. IPv4 adress + DNS servers over PPPoE

 

If you use Omada Controller, please click Advanced Settings to configure the IP info provided by your ISP.

 

 

5. IPv6 adress range + DNS server (IPv6) over DHCPv6-PD request (in PPPoE). Use adress of range from router

 

The TL-ER7206 doesn't support IPv6 for the moment, it is being developed and will be updated in the following software versions, you may wait patiently for the firmware update.

https://www.tp-link.com/en/business-networking/omada-sdn-router/er7206/#specifications

 

>> Omada EAP Firmware Trial Available Here << *Try filtering posts on each forum by Label of [Early Access]*
  0  
  0  
#2
Options
Re:Dutch KPN setting
2021-01-18 08:51:41 - last edited 2021-04-18 10:02:07

@Fae 

 

Hi Fae,

 

Thanks for your feedback.

 

I tryed at first to set up via the web GUI and had some issues and no "connection to Internet". After I have tryed via the Omoda cloud and the same result "no conncetion to Internet".

 

And IPv6 is good to know, I have to wait. Have you an indication of release IPv6?

 

I will try it again and let you know.

 

Bart

  0  
  0  
#3
Options
Re:Dutch KPN setting
2021-01-19 08:00:51 - last edited 2021-04-18 10:02:07

@Fae 

 

@Fae 

 

Hello Fae,

 

I tryed this several times, but I still have no connection with the internet :-(.

 

So I made Router ISP -- TL-ER7206 -- Managed PoE switches --> EAP / laptops / computers / IoT. 

 

For the time being I'm fine and the network is running, I have to due to the Covid-19 (working at home and digital education for the childern).

 

Next step (over a couple of weeks / motnhs) is to skip the Router ISP. Then I will try it again and hopefully without pressure of childern :-)

 

Thanks,

Bart

  0  
  0  
#4
Options
Re:Dutch KPN setting
2021-05-14 19:02:41 - last edited 2021-05-14 19:03:06

@BartD. Were you able to get it to work? I have a similar setup and it would be nice to have one less hop on the network... Thanks, Ivar

  1  
  1  
#5
Options
Re:Dutch KPN setting
2021-05-18 12:31:53
Not yet, is available when IPv6 will be implemented. So we have to wait ;-)
  0  
  0  
#6
Options
Re:Dutch KPN setting-Solution
2021-08-07 09:12:56 - last edited 2021-08-09 08:50:04

@BartD. 

 

This morning I saw an update for my TL-R605 and TL-ER7206 with IPv6 functionality added! Since then I've successfully connected to the KPN fiber network! Here are my settings:

Hope this helps, goodluck!

Recommended Solution
  3  
  3  
#7
Options
Re:Dutch KPN setting
2021-08-11 17:53:14
Thanks for sharing the information. I will try this next week ;-)
  0  
  0  
#8
Options
Re:Dutch KPN setting
2021-08-18 16:26:00

@Saibot 

Hi Saibot, I trying to make the setup working; for internet it is working but for ITV of KPN I don't get it up and running. I have used your example :-)

 

How to setup TV VLAN 4 in the provide print screen from you (TV (netwerk configuratie)? May be you can give a suggestion :-) Below I have the settings provided oby KPN

 

Internet

  • PPPoE via VLAN 6 (802.1q).
  • PPPoE authenticatie PAP met een gebruikersnaam en wachtwoord (bijv internet / internet).
  • Maximale pakket grote (mtu) 1500 bytes (rfc4638)
  • IPv4 adres + DNS servers via PPPoE verkrijgen
  • IPv6 adres reeks + DNS servers (IPv6) via DHCPv6-PD verzoek (in PPPoE). Een adres gebruiken uit reeks voor router.

TV (netwerk configuratie)

  • Ethernet VLAN 4 (802.1q)
  • Adres via DHCP vereist mee sturen option60 (Vendor Class Identifier) met waarde: IPTV_RG.
  • Specifieke route informatie via DHCP opvraagbaar (option 55 bevat 1, 3, 28 en 121)
  • Extra; DNS servers niet gebruiken + default gateway niet gebruiken alleen specifieke routes.
  • Inschakelen IGMP-proxy incl fast-leave optie vereist voor TV signaal in thuis netwerk (min IGMPv2).

 

Or should I create a VLAN in the Omada controller:

 

Or should it done via 

 

I'm asking before trying; two students at home and working at home :-)

 

Best Regards,

Bart

  0  
  0  
#9
Options

Information

Helpful: 0

Views: 3031

Replies: 8

Related Articles
TL-R605 [KPN] configure separate WAN VLAN for IGMP proxy
2727 1
About Us
Press
Copyright © TP-Link Corporation Limited. All rights reserved.