Sfp ports TP-Link TL-SG2210MP

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
12
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Sfp ports TP-Link TL-SG2210MP
Sfp ports TP-Link TL-SG2210MP
2021-01-25 20:04:02

Hi

 

im looking at buying a TP-Link TL-SG2210MP, I need 10 ports, is it possible to use a rj45 lan module plugged into sfp port and connect a normal lan cable 

 

regards

 

Fergin

0
0
#1
Options
15 Reply
Re:Sfp ports TP-Link TL-SG2210MP
2021-01-26 11:26:50
Yes, you can do it. You can use gigabit RJ45 SFP module. However, you can use only fix 1G module. Not 10/100/1000 SGMII modules, as it will not work. 100M fix modules also will not work.
1
1
#2
Options
Re:Sfp ports TP-Link TL-SG2210MP
2021-01-26 12:01:46

 

@Fergin 

 

Hey Fergin

 

Rather than buying 2x SPF modules and the  TL-SG2210MP, you might find its cheaper / better value to just buy a 16 or 24 port switch

 

Something like TL-SG2218 which is due out very soon although we have no exact dates yet

0
0
#4
Options
Re:Sfp ports TP-Link TL-SG2210MP
2021-01-26 12:06:06

@Fergin When you are talking about PoE switches, you should understand, that it is much more expensive, than non-PoE. Difference between 8 and 16 port NON-poe switch is not so big, as between PoE models. That is why usually CCTV vendors have combo-ports, while tp-link doesn't want to implement combo-ports for gigabit switches, only for 100M (T1500-28PCT). That is sad and that is the reality, a lot of cases use copper RJ45 SFP modules with tplink 8-port  poe switches. I use all 8 ports for cameras and I do not want to lose PoE port for connecting NVR, or smth like this.

0
0
#5
Options
Re:Sfp ports TP-Link TL-SG2210MP
2021-01-29 12:17:50

Dear @Fergin,

 

im looking at buying a TP-Link TL-SG2210MP, I need 10 ports, is it possible to use a rj45 lan module plugged into sfp port and connect a normal lan cable 

 

Kind note: TP-Link SFP switch ONLY supports optical fiber on the SFP port, it doesn't support to use RJ45 module plugged into SFP port and then connect with a RJ45 cable, maybe you can give it a try but we cannot guarantee it can work well.

Get Started Here: https://community.tp-link.com/en/business/forum/topic/551684 https://community.tp-link.com/en/business/forum/topic/552406
1
1
#7
Options
Re:Sfp ports TP-Link TL-SG2210MP
2021-01-29 16:04:29

@Fergin thanks think I'll go for the 16 port, I already have unmanaged tp link switch's but looking for some compatible with my oc200

 

thanks for all replies

 

Fergin

1
1
#8
Options
Re:Sfp ports TP-Link TL-SG2210MP
2021-02-22 07:54:20

@Fergin 

I just installed Extreme-branded 10/10/1000 Copper SFP into my TL-SG-2210MP. Works flawlessly, so the information that it only support optical SFP, or only 1GBit SFPs is actually wrong.

I did not test any speed below 1GBit though, as I have no need.

YMMV of course, it maybe down to the SFP.

1
1
#9
Options
Re:Sfp ports TP-Link TL-SG2210MP
2021-02-22 09:06:42

Hi

 

do both sfp work individually 

 

regards

 

fergin

0
0
#10
Options
Re:Sfp ports TP-Link TL-SG2210MP
2021-02-22 09:14:13

@Fergin 

 

Yes, of course. I have a fiber SFP in one port and a copper SFP in the other. I have fiber link between 2 houses and use the other SFP-port to get more copper ports since the 2210 only have 8 copper ports. I have not tried with 2 copper SFP in one 2210, but see no reason for it not to work.

I use Omada, and looking at the switch there's no extra info, just that there is link and configuring VLANs works as intended.

I can't tell if 10 and 100MBit works since I have not tried those speeds, but gigabit works fine.

Of course, there will be no PoE on the SFP.

0
0
#11
Options
Re:Sfp ports TP-Link TL-SG2210MP
2021-02-22 09:51:54
Thanks for that Fergin
0
0
#12
Options
Re:Sfp ports TP-Link TL-SG2210MP
2021-02-22 09:51:56
Thanks for that Fergin
0
0
#13
Options