[Solution] EAP235-Wall EAP230-Wall: Wireless clients connect to SSID with VLAN can't get IP address
[Solution] EAP235-Wall EAP230-Wall: Wireless clients connect to SSID with VLAN can't get IP address
Hi Guys,
We find a VLAN issue of the EAP235-Wall. If we enable the VLAN in the wireless SSID and the VLAN in three downlink LAN ports in the same time, the wireless clients connect with the VLAN SSID can't get an IP address from the corresponding VLAN subnet and access the Internet.
The next official firmware will fix this issue and we have made a beta firmware for the temporary solution: EAP235-WALL_v1_20210209(Beta)
Regarding the above issue, firmware 3.0.0 Build 20210322 has fixed this issue.
Update on 23 July 2021:
We found that wireless clients connected to SSID with VLAN enabled may fail to obtain IP addresses under some circumstances(if the packets have QoS Tag). The R&D team has located the issue and it will be fixed in the subsequent firmware upgrade soon.
This issue applies to:
EAP235-Wall_V1_3.0.0 Build 20210322,
EAP230-Wall_V1_3.0.0 Build 20210322
Update on 19 October 2021:
The official firmware has been released to fix the SSID VLAN related issue, please visit the TP-Link official website for update,
https://www.tp-link.com/support/download/eap235-wall/#Firmware
Here is the latest firmware:
EAP235-Wall(US)_V1_3.1.0_Build 20210721
EAP235-Wall(EU)_V1_3.1.0_Build 20210721
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
With the new version "EAP235-WALLv1_3.1.0_[20210721-rel46004]_up_signed.bin" that I received by mail the VLAN's are working fine now.
As I don't think I am allowed to publish this firmware here I would suggest every one with the same issue to ask the the support directly for this updated BETA.
- Copy Link
- Report Inappropriate Content
Dear @fishbone222,
fishbone222 wrote
With the new version "EAP235-WALLv1_3.1.0_[20210721-rel46004]_up_signed.bin" that I received by mail the VLAN's are working fine now.
As I don't think I am allowed to publish this firmware here I would suggest every one with the same issue to ask the the support directly for this updated BETA.
Thank you for your valued feedback! Glad to hear that your concern was resolved finally.
Yes, regarding the subject issue, it would be suggested to contact the support to get the new firmware for a fix.
- Copy Link
- Report Inappropriate Content
@Fae
thank you for your message, I have uploaded the correct firmware to the EAP-230 Wall and have tested the Wifi and fixed ethernet port and everything is working just fine now.
Kind Regards,
Edwin Guliker
- Copy Link
- Report Inappropriate Content
Information
Helpful: 1
Views: 4488
Replies: 13
Voters 1
