EAP 225 Outdoor in Omada v3.2.14 not showing data
EAP 225 Outdoor in Omada v3.2.14 not showing data
I tried setting up Omada (3.2.14) with my EAP 225-Outdoor (1.20.0 Build 20200422 Rel. 70543) and EAP 245 V1 (1.4.0 Build 20180323 Rel. 32551). It seems to work, but I can't see any clients listed or details about it. Clients can connect, but no data is showing up.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Dear @swickts,
swickts wrote
Here's what I see:
Notice how there's nothing for channel, clien number/download/upload are all 0. If I turn off the EAP245 device, I'm still able to connect the network just fine, but still empty/0 for the stats for the outdoor one.
It's because the EAP225-Outdoor is running with a firmware that adapts Controller v4, downgrade the firmware will fix it.
Here is the EAP225-Outdoor(US) firmware for Controller v3.
- Copy Link
- Report Inappropriate Content
Dear @john.redcat,
john.redcat wrote
Hi Sir, Can you provide me also a firmware for outdoor eap110(US) for omada controller oc200 v3.2.14?
EAP110-Outdoor(US)_V3_3.5.0 Build 20200113
Kind Note: All of the EAP firmware for Omada Controller v3.x can be found in this post.
- Copy Link
- Report Inappropriate Content
The Clients page should be like this, we can see the Download, Upload, Rate, Active time.
Here is the User Guide of 3.2.1 Controller.
Can you paste a picture of what you mentioned?
- Copy Link
- Report Inappropriate Content
Seems it's a compatible issue, you may contact TP-Link and ask them to send you the firmware that compatible with your V3 Controller for EAP225-Outdoor.
- Copy Link
- Report Inappropriate Content
Dear @swickts,
swickts wrote
I tried setting up Omada (3.2.14) with my EAP 225-Outdoor (1.20.0 Build 20200422 Rel. 70543) and EAP 245 V1 (1.4.0 Build 20180323 Rel. 32551). It seems to work, but I can't see any clients listed or details about it. Clients can connect, but no data is showing up.
A similar topic has been discussed in the post below.
EAP245 V3 not showing stats with OC200 controller version 3.2.14
- Copy Link
- Report Inappropriate Content
@Virgo Thanks - I've sent a request to TP-Link to see if I can get a firmware that supports the V3 Omada software. Kind of annoying that it says it supports it, but they don't provide a firmware that works with it.
- Copy Link
- Report Inappropriate Content
Here's what I see:
Notice how there's nothing for channel, clien number/download/upload are all 0. If I turn off the EAP245 device, I'm still able to connect the network just fine, but still empty/0 for the stats for the outdoor one.
- Copy Link
- Report Inappropriate Content
Dear @swickts,
swickts wrote
Here's what I see:
Notice how there's nothing for channel, clien number/download/upload are all 0. If I turn off the EAP245 device, I'm still able to connect the network just fine, but still empty/0 for the stats for the outdoor one.
It's because the EAP225-Outdoor is running with a firmware that adapts Controller v4, downgrade the firmware will fix it.
Here is the EAP225-Outdoor(US) firmware for Controller v3.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hi Sir, Can you provide me also a firmware for outdoor eap110(US) for omada controller oc200 v3.2.14?
Thanks!
- Copy Link
- Report Inappropriate Content
Dear @john.redcat,
john.redcat wrote
Hi Sir, Can you provide me also a firmware for outdoor eap110(US) for omada controller oc200 v3.2.14?
EAP110-Outdoor(US)_V3_3.5.0 Build 20200113
Kind Note: All of the EAP firmware for Omada Controller v3.x can be found in this post.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 2731
Replies: 11
Voters 0
No one has voted for it yet.