PoE Schedule

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

PoE Schedule

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
PoE Schedule
PoE Schedule
2021-05-21 09:50:34
Model: OC200  
Hardware Version: V1
Firmware Version: 1.8.0 Build 20210406 Rel.58757

When I configure PoE schedule on a port in a specific time, this port is enable for this specific time. 

I think there is a mismatch about this:

It happens the opposite

Network Engineer 1.0
  0      
  0      
#1
Options
8 Reply
Re:PoE Schedule
2021-09-16 08:25:39

i have a question about schedule.

i need open the POE power every day morning 8:00am to next day 2:00am.

How can i setting up the time. because the schedule only can set until 00:00 only. 

  0  
  0  
#2
Options
Re:PoE Schedule
2021-10-04 13:53:54

@Gomapping 

Hi,

 

I have exact same issue and as you can see in this post https://community.tp-link.com/en/business/forum/topic/234658?page=3  apparently their R&D team is working on this for about a year (LOL) and still no update. It seems ridicules.

  0  
  0  
#3
Options
Re:PoE Schedule
2021-10-06 18:05:29

@Le0n 

Thank You for ur info.i will look at it.

  0  
  0  
#4
Options
Re:PoE Schedule
2021-10-08 03:56:39 - last edited 2021-10-08 03:56:57

Dear @Gomapping,

 

Gomapping wrote

i have a question about schedule.

i need open the POE power every day morning 8:00am to next day 2:00am.

How can i setting up the time. because the schedule only can set until 00:00 only. 

 

As I know, the PoE Schedule function will be modified on the Omada Controller v5.x in the near future.

At present, we need to create two PoE schedule rules to make it.

 

 

>> Omada EAP Firmware Trial Available Here << *Try filtering posts on each forum by Label of [Early Access]*
  0  
  0  
#5
Options
Re:PoE Schedule
2021-10-12 13:52:33

@Fae 

 

Hi,

I wish it was that easy to fix. I've tried your solution and created two POE rules same as the provided screenshots but the issue is that this solution will restart the router at 12AM before the second time range starts.

 

thanks

  0  
  0  
#6
Options
Re:PoE Schedule
2021-10-13 01:41:03

Dear @Le0n,

 

Le0n wrote

the issue is that this solution will restart the router at 12AM before the second time range starts.

 

When you say the router, do you mean the PoE switch that supplies power over Ethernet to the powered devices?

If not, may I know the model number of the router? How is the router connected to your network?

 

Do you find any controller Logs at 12 AM when the router gets restarted?

What's the model number and firmware version of your TP-Link PoE switch?

>> Omada EAP Firmware Trial Available Here << *Try filtering posts on each forum by Label of [Early Access]*
  0  
  0  
#7
Options
Re:PoE Schedule
2021-10-13 19:09:42

Hi @Fae 

 

Sorry. My bad. I was talking about the POE switch not the router.

I have

Omada controller OC200 1.0  /Controller Version:4.4.4   /Firmware Version:1.9.1 Build 20210721 Rel.39263

POE switch TL-SG2210MP v1.0   /   Firmware Version:1.0.2 Build 20210806 Rel.55686

AP   EAP225(US) v3.0  / Firmware Version:5.0.5 Build 20210604 Rel. 51118

 

at 12AM it couldn't run the second schedule because first schedule was shutting down ports on the switch. it was showing a log like  "Second POE schedule failed to execute" and then it was showing my APs were disconnected. After a few minutes APs were up again.

 

Please let me know if you need more info.

 

thanks

 

 

  0  
  0  
#8
Options
Re:PoE Schedule
2021-10-15 06:05:08

Dear @Le0n,

 

Le0n wrote

at 12AM it couldn't run the second schedule because first schedule was shutting down ports on the switch. it was showing a log like  "Second POE schedule failed to execute" and then it was showing my APs were disconnected. After a few minutes APs were up again.

 

I configured a PoE schedule at 11:25PM to enable PoE power for 3 ports during 11:30pm-00:00am and 00:00am-1:30am. It's turned to work as expected: the PoE schedule executed on the desired ports properly, connected EAPs were powered up and working during the time range I set, there was no disconnection at 00:00AM at all.

 

Below is the Event System Log I found:

 

 

 

Could you please test one more time to confirm whether you can reproduce the problem steadily?

 

>> Omada EAP Firmware Trial Available Here << *Try filtering posts on each forum by Label of [Early Access]*
  0  
  0  
#9
Options