OC200 VLAN

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

OC200 VLAN

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
OC200 VLAN
OC200 VLAN
2021-10-18 07:01:01
Model: OC200  
Hardware Version: V1
Firmware Version:

I want to get your help

I'm sorry it's hard to read by machine translation

 

Contents


OC200 cannot see oc200 from omada.tplinkcloud.com when VLAN is running
Is this the right thing to do or the wrong thing to do?
If it's wrong, I want to be able to see it
I want to get your help

 

environment


internet ← → router (home router) ← → L2switch (GSS116E) ← → TL-SG105PE ← → OC200 ← → AX3600

 

Contents


・Router is a home router
・Using the tag VLAN of GSS116E, the trunk port of GSS116E is connected to TL-SG105PE.
・When connecting to tagVLAN (trunkport), time has passed, the cloud lamp of OC200 is turned off, and it cannot be seen from omada.tplinkcloud.com.
・If you need to change the OC200 settings, where should you change them?
・Create and send a detailed diagram later

 

I want to solve it. Thank you

  0      
  0      
#1
Options
3 Reply
Re:OC200 VLAN
2021-10-19 07:15:37

@ys1234 Hey,what about your network diagram ?

  0  
  0  
#2
Options
Re:OC200 VLAN
2021-10-19 08:38:40 - last edited 2021-10-19 10:54:18

@ys1234 

 

Thanks!

 

L2 switch tag VLAN enabled        
        
    omada.tplinkcloud.com/#controller STATUS OFFLINE    
    I can't connect with Cloud Access    
        
    OC200 "cloud" lamp goes out    
        
    laptop is    
        SSID_A(VLAN10:192.168.10.0/22)
        SSID_B(VLAN20:192.168.20.0/24)
    Connect to and watch the internet    
        
    I think that it is necessary to add or change the setting to OC200    
     if Cloud Access is not possible

 

 

  0  
  0  
#3
Options
Re:OC200 VLAN
2021-11-02 02:34:18

@ys1234 Hello,Are there any devices in your network that can be managed by OC200? I don’t seem to see any devices that can be managed by OC200 from your network topology ? Have you logged in to the OC200 interface via IP locally, and then enabled cloud access ?

  0  
  0  
#4
Options