OC200 Firmware 5.3.1

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

OC200 Firmware 5.3.1

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
OC200 Firmware 5.3.1
OC200 Firmware 5.3.1
2022-05-24 07:25:33 - last edited 2022-07-25 09:10:27
Model: OC200  
Hardware Version: V1
Firmware Version: 5.1.7
I just purchased an OC200 hardware controller with the aim of migrating away from the software version.
 
However the software version is 5.3.1 which has not yet been released for the hardware which is stuck on 5.1.7 as a result I am unable to do the migration due to differing firmware/software levels.
 
Am I stuck with an overpriced doorstop until the update is release for the OC200 (could be months?!) or is there an alternative solution to migrate?
 
Ta! Sc0th.
  0      
  0      
#1
Options
1 Accepted Solution
Re:OC200 Firmware 5.3.1-Solution
2022-07-25 08:51:20 - last edited 2022-07-25 09:10:27

Dear @Sc0th,

 

Sc0th wrote

Am I stuck with an overpriced doorstop until the update is release for the OC200 (could be months?!) or is there an alternative solution to migrate?

 

Sorry for any trouble caused. The OC200 Controller 5.3 has been released today, please take your time to upgrade it!

>> Omada EAP Firmware Trial Available Here << *Try filtering posts on each forum by Label of [Early Access]*
Recommended Solution
  0  
  0  
#7
Options
10 Reply
Re:OC200 Firmware 5.3.1
2022-05-24 21:46:36

  @Sc0th 

 

Doorstop for a little while, unfortunately if migration is desired.

<< Paying it forward, one juicy problem at a time... >>
  1  
  1  
#2
Options
Re:OC200 Firmware 5.3.1
2022-05-24 23:36:48

  @Sc0th suspected that may be the case, thanks for the confirm, I shall wait in hopeful anticipation :)

  0  
  0  
#3
Options
Re:OC200 Firmware 5.3.1
2022-05-24 23:49:25

  @Sc0th 

 

Me too.  My Docker based controller is already at 5.3.1 but my OC200 lags behind at 5.1.7.  I have no idea why the lengthy delay in releasing it on known and well controlled hardware.  

<< Paying it forward, one juicy problem at a time... >>
  0  
  0  
#4
Options
Re:OC200 Firmware 5.3.1
2022-06-15 10:31:09

  This is madness, why are we still waiting.

 

@Fae can you help shed any light on this?

  0  
  0  
#5
Options
Re:OC200 Firmware 5.3.1
2022-06-15 19:04:39 - last edited 2022-06-15 19:05:10

  @Sc0th 

 

from Fae ( from another thread on this forum) 

 

They found a major bug in 5.3.1 for OC200/300   

They need to fix this first.    The bug didn't exist on the software 5.3.1 

 

 

  1  
  1  
#6
Options
Re:OC200 Firmware 5.3.1-Solution
2022-07-25 08:51:20 - last edited 2022-07-25 09:10:27

Dear @Sc0th,

 

Sc0th wrote

Am I stuck with an overpriced doorstop until the update is release for the OC200 (could be months?!) or is there an alternative solution to migrate?

 

Sorry for any trouble caused. The OC200 Controller 5.3 has been released today, please take your time to upgrade it!

>> Omada EAP Firmware Trial Available Here << *Try filtering posts on each forum by Label of [Early Access]*
Recommended Solution
  0  
  0  
#7
Options
Re:OC200 Firmware 5.3.1
2022-07-25 08:54:05

  @Fae Thank you! However..... do you think there will be any issues going from software controller 5.3.1 -> OC200 5.3.2?

 

It does specifically say 'same version' on the migration page, to the best of my knowledge there is no 5.3.2 software controller version.

  0  
  0  
#8
Options
Re:OC200 Firmware 5.3.1
2022-07-25 08:57:08

Dear @Sc0th,

 

Sc0th wrote

  @Fae Thank you! However..... do you think there will be any issues going from software controller 5.3.1 -> OC200 5.3.2?

 

It does specifically say 'same version' on the migration page, to the best of my knowledge there is no 5.3.2 software controller version.

 

No worries. It's okay to migrate from software controller 5.3.1 to OC200 5.3.2, they are both version 5.3.

>> Omada EAP Firmware Trial Available Here << *Try filtering posts on each forum by Label of [Early Access]*
  0  
  0  
#9
Options
Re:OC200 Firmware 5.3.1
2022-07-25 09:01:15

  @Fae Great thanks for the confirm, I shall make it so!

  0  
  0  
#10
Options
Re:OC200 Firmware 5.3.1
2022-07-25 09:02:06

Dear @Sc0th,

 

Sc0th wrote

  @Fae Great thanks for the confirm, I shall make it so!

 

You're welcome!

>> Omada EAP Firmware Trial Available Here << *Try filtering posts on each forum by Label of [Early Access]*
  0  
  0  
#11
Options

Information

Helpful: 0

Views: 1099

Replies: 10

Related Articles