Business Community > WiFi > Network PING higher when create SSID with different VLAN
< WiFi

Network PING higher when create SSID with different VLAN

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Network PING higher when create SSID with different VLAN

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Network PING higher when create SSID with different VLAN
Network PING higher when create SSID with different VLAN
2022-07-04 01:06:40
Tags: #VLAN & Multi-Networks
Model: OC200  
Hardware Version: V4
Firmware Version: 5.1.7

Hi,

 

i got 2 EAP115 controlled by OC200. when i create one production SSID VLAN32, there is no problem with the client connection.

After i create another Staff SSID with different VLAN121 there is some issue on my client connection. their ping will become higher suddenly like not stable.

the SSID is working i can get the ip follow the set vlan but only the connection will not stable, like slow and hang. when i ping to server. it will got to 1000ms. after i deleted the staff SSID. it will stable again.

Can anyone advice me.

 

My vlan and Ip for controller and EAP

 

OC200 - 10.30.232.64 VLAN232

EAP115 - 10.30.32.250 VLAN32

EAP115- 10.30.32.251 VLAN32

 

my EAP version v4 -5.0.4

my controller version- 5.1.7

 

Production SSID-VLAN32

STAF SSID-VLAN121

 

FYI my switch is CISCO switch.

 

 

  0      
 
  0      
 
#1
Options
6 Reply
Re:Network PING higher when create SSID with different VLAN
2022-07-04 08:17:29

  @Adam61 

 

What specific client is having this issue? All clients?
If you can share a screenshot of the Ping test, will be more helpful.

 

Just striving to develop myself while helping others.
  0  
  0  
#2
Options
Re:Network PING higher when create SSID with different VLAN
2022-07-04 08:58:08

  @Virgo hi , basically all my client will having problem. so far i just test 4 PC to connect with wifi. i use 2 eap for testing and 4 client. it will look like below picture. 

 

 

this picture when i delete the staff SSID. the ping okay


 

  0  
  0  
#3
Options
Re:Network PING higher when create SSID with different VLAN
2022-07-06 04:29:10

  @Adam61 

either a problem with your gateway or a problem with the wifi comm. it's quite normal to see a drop. even with wired connection, i sometimes see a drop to my other devices.

but you never really run into an issue with this, do you?

 

ScReW yOu gUyS. I aM GOinG hoMe. —————————————————————— For heaven's sake, can you write and describe your issue based on plain fact, common logic and a methodologic approach? Appreciate it.
  0  
  0  
#4
Options
Re:Network PING higher when create SSID with different VLAN
2022-07-06 09:40:12

  @Adam61 

 

Can you try pinging the IP of the gateway and test if get the same result?
Also, is this new SSID having this problem after adding the new SSID?
Or is it causing this problem for both SSIDs across the EAP after adding the second SSID?
 

How exactly did you ping the IP address in the screenshot above and whose IP address did you ping?

Just striving to develop myself while helping others.
  0  
  0  
#5
Options
Re:Network PING higher when create SSID with different VLAN
2022-07-06 13:46:22

  @Adam61 

 

By chance is Air Time Fairness turned off?  

 

Also, is Your AP's completely updated to the newest firmware version?  

 

Are the 2 VLANs going in the same direction?  Maybe one is bypassing the firewall?  

I can not teach anyone anything - I can only make them think - Socrates
  0  
  0  
#6
Options
Re:Network PING higher when create SSID with different VLAN
2022-07-06 17:44:33

  @Adam61 

 

You have your “Production Switch” on “10.30.1.xxx,” but your AP is on “10.30.32.xxx.” What is your native VLAN on the trunk (I assume) with the “CoreSwitch?” Is it Vlan1 on one and Vlan32 on the other? I would not use a native VLAN on the AP trunk different than the one on the rest of the trunks. Also, if I had an Omada controller (I don't), I would place it as close to the APs as possible and on the same subnet.

 

For the reference, my TP-Link APs are EAP660 HD and my CISCO switches are CBS350-8MGP-2X.

Kris K
  0  
  0  
#7
Options

Information

Helpful: 0

Views: 723

Replies: 6

Tags

VLAN & Multi-Networks
Related Articles
I cannot ping two different networks with omada products
1564 0
Will extender with different SSID be seen on same network?
378 0
Powerline Adapter with 2 Receiver - Different SSID
460 0
Create SSID for one AP Only
510 0
EAP670 multiple SSID issue
2376 0
Create a single WiFI network with three Routers
802 0
About Us
Press
Copyright © TP-LINK CORPORATION PTE. LTD. All rights reserved.