Business Community > Routers > ER7206 Router configuration LAN/WAN public ip address
< Routers

ER7206 Router configuration LAN/WAN public ip address

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

ER7206 Router configuration LAN/WAN public ip address

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
ER7206 Router configuration LAN/WAN public ip address
ER7206 Router configuration LAN/WAN public ip address
2022-07-11 16:38:31
Tags: #VLAN & Multi-Networks #NAT #router lan/wan
Model: ER7206 (TL-ER7206)  
Hardware Version: V1
Firmware Version: 1.2.1

Hello, i bought ER7206 as a router that will be connectet between i DSL modem (with static IP), and second router, also with static IP. COnfiguration looks like that DSL Modem ->> WAN port ER7206 with public ip 85.134.12.34 / 255.255.255.252 (example ip) ->> LAN port ER7206 with public ip 165.12.134.225 / 255.255.255.240 (we got public ip from 226-238, 225 is a gateway) ->> WAN1 port as a main ISP for LAN users. I don't know how configure this LAN interface for public IP and how configure routing table. Has anyone this kind or similar configuration ?

thanks from advance for help

levarek

  0      
 
  0      
 
#1
Options
4 Reply
Re:ER7206 Router configuration LAN/WAN public ip address
2022-07-12 15:16:10

  @levarek 

 

So you're wanting every LAN device to be mapped to a public IP?

 

 

I can not teach anyone anything - I can only make them think - Socrates
  0  
  0  
#2
Options
Re:ER7206 Router configuration LAN/WAN public ip address
2022-07-12 15:20:12

  @levarek Yes, that is the plan.

In my configuration i use LAN port with public address to WAN port another router with One-To-One NAT load balance with another one connection as a spare.

 

  0  
  0  
#3
Options
Re:ER7206 Router configuration LAN/WAN public ip address
2022-07-13 06:43:13

  @levarek 

 

You can set the LAN IP as the public IP, but there is no way to change the routing table.

Just striving to develop myself while helping others.
  0  
  0  
#4
Options
Re:ER7206 Router configuration LAN/WAN public ip address
2022-07-13 07:29:10

  @Virgo

 

hi,

LAN interface with public ip should working as a switch, with gateway on WAN interface.

There's no need to add static route, standard routing from LAN to WAN will be fine.

 

 

 

  0  
  0  
#5
Options

Information

Helpful: 0

Views: 1890

Replies: 4

Tags

VLAN & Multi-Networks NAT
router lan/wan
About Us
Press
Copyright © TP-LINK CORPORATION PTE. LTD. All rights reserved.