Business Community > Routers > TP el5120 Setting up WAN issues
< Routers

TP el5120 Setting up WAN issues

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

TP el5120 Setting up WAN issues

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TP el5120 Setting up WAN issues
TP el5120 Setting up WAN issues
2022-07-16 17:23:29
Tags: #Load Balancing #DHCP Service
Model: TL-ER5120  
Hardware Version: V4
Firmware Version: Latest

I have two modem one Fiber one cable - the Fiber connects no problem but the cable modem has issues. The cable modem uses the same base up 192.168.0.1 as the load balancer so I modified the cable modem to 192.168.0.9 and modified the cable modesm up range from 192.168.0.10 to 200 

 

any ideas

 

  0      
 
  0      
 
#1
Options
2 Reply
Re:TP el5120 Setting up WAN issues
2022-07-16 17:24:59
I meant ip not up
  0  
  0  
#2
Options
Re:TP el5120 Setting up WAN issues
2022-07-18 06:20:41

  @JFT 

 

Hi

 

Not sure how you connect your whole network. But I guess you have two Modems connected to the ER5120 and they have the same subnet?

 

My suggestion is to change the Modem's IP to some other subnet like 192.168.2.1/24 or 10.0.0.1/24.

Router's WAN IP cannot be the same subnet as it's LAN IP.

  0  
  0  
#3
Options

Information

Helpful: 0

Views: 160

Replies: 2

Tags

Load Balancing DHCP Service
About Us
Press
Copyright © TP-LINK CORPORATION PTE. LTD. All rights reserved.