CPE210 Spikes in ping

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

CPE210 Spikes in ping

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
CPE210 Spikes in ping
CPE210 Spikes in ping
2022-07-20 08:50:17 - last edited 2022-07-20 10:03:21
Model: CPE210  
Hardware Version: V3
Firmware Version: 2.2.2 Build 20200612 Rel. 38101 (4555)

Hello,

 

I recently set up a network using two CPE210 units with a distance between the buildings being around 600m. Followed this guide (in Swedish, but the screenshots are in English) and I got it up and running with a speed of about 75 - 80Mbps. My only problem is that it is a bit unstable where I get these sharp spikes in ping from time to time, and me not being the most tech-savy when it comes to networks I'm wondering if there's any settings I can change to reduce the spikes?

 

Link to the setup guide I used: www.kjell. com/se/kunskap/guider/guide-skicka-natverk-tradlost-mellan-byggnader

 

 

Thank you

 

 

  0      
  0      
#1
Options
1 Reply
Re:CPE210 Spikes in ping
2022-07-21 05:44:15

  @SvenAndersson Basically there is not so many things we can do. It could be the limitation on 2.4Ghz wifi. There are so many things that can influence the 2.4Ghz, specially in long distance wireless connection.

 

You can try to change the wireless channel to 12 or 13, and disable Maxtream, to see if it can helps.

  0  
  0  
#2
Options